Βιογραφικό Σημείωμα Δ.Ε. Μανωλάκου

In english

ΣΠΟΥΔΕΣ - ΤΙΤΛΟΙ

ΕΡΕΥΝΗΤΙΚΗ ΔΡΑΣΤΗΡΙΟΤΗΤΑ

ΕΚΠΑΙΔΕΥΤΙΚΗ ΔΡΑΣΤΗΡΙΟΤΗΤΑ

ΕΠΙΣΤΗΜΟΝΙΚΕΣ ΔΗΜΟΣΙΕΥΣΕΙΣ

A. ΔΙΑΤΡΙΒΕΣ

Β. ΔΗΜΟΣΙΕΥΣΕΙΣ ΣΕ ΠΕΡΙΟΔΙΚΑ

Γ. ΔΗΜΟΣΙΕΥΣΕΙΣ ΣΕ ΣΥΝΕΔΡΙΑ/ΗΜΕΡΙΔΕΣ

Δ.  ΜΟΝΟΓΡΑΦΙΕΣ/ΒΙΒΛΙΑ

1.            ΣΠΟΥΔΕΣ - ΤΙΤΛΟΙ

  

·      Ιούν. 1973               

Αποφοίτηση  από Ιωνίδειο Πρότυπο Σχολή Πειραιά, διακριθείς πρώτος

·      Οκτ. 1973               

Εισαγωγή  στο  Τμήμα   Nαυπηγών  της   Σχολής   Μηχ.-Ηλεκ. του ΕΜΠ μετά από εισιτήριες εξετάσεις

·      Ιούν. 1979               

Διπλ. Ναυπηγός-Μηχανολόγος  ΕΜΠ (Βαθμός Διπλώματος : “Λ. Καλώς 7.50”)

·      Οκτ. 1979 - Οκτ. 1980      

Εκπλήρωση στρατιωτικών υποχρεώσεων στο Π. Ναυτικό

·      Οκτ. 1980 - Οκτ. 1983      

Εκπόνηση  Διδακτορικής  Διατριβής  στο  Τμήμα Ναυπηγών  του  ΕΜΠ,   υπό  την  επίβλεψη  του  Καθηγητού  Α.Αντωνίου,  με θέμα : “Έρευνα επί της δυνατότητος εφαρ μογής  των  μεθόδων  πλαστικής  αναλύσεως  στη  μελέτη του φαινομένου των συγκρούσεων πλοίων”

·      Μάιος 1984            

Δρ Μηχανικός ΕΜΠ

·      Ιούν. 1984 - Οκτ. 1987      

Επιστημονικός Ερευνητής  στον  Τομέα Τεχνολογίας των Κατεργασιών του Τμήματος Μηχανολόγων ΕΜΠ

·      Μάιος 1986 - Ιούλ. 1988     

Έκτακτος Επίκ. Καθηγητής Τμήματος Μηχανολόγων ΤΕΙ Πειραιά

·      Οκτ. 1987 - Οκτ. 1988     

Ειδικός  Επιστήμονας   Τμήματος   Μηχανολόγων  ΕΜΠ, Τομέας Τεχνολογίας των Κατεργασιών

·      Ιούλ. 1988 - Μάρτ. 1989     

 Μόνιμος Επίκ. Καθηγητής Τμήματος  Μηχανολόγων ΤΕΙ Πειραιά

·      Μάρτ. 1989 - Μάρτ. 1996     

Επί θητεία  Επίκουρος  Καθηγητής Τμήματος Μηχανολόγων ΕΜΠ, Τομέας Τεχνολογίας των Κατεργασιών

·      Μάρτ. 1996 - Ιούλ. 1999

Μόνιμος Επίκουρος Καθηγητής Τμήματος Μηχανολόγων ΕΜΠ, Τομέας Τεχνολογίας των Κατεργασιών

·      Ιούλ. 1999  -                   

Αναπληρωτής   Καθηγητής    Τμήματος   Μηχανολόγων ΕΜΠ, Τομέας Τεχνολογίας των Κατεργασιών

 

 

2.             ΕΡΕΥΝΗΤΙΚΗ ΔΡΑΣΤΗΡΙΟΤΗΤΑ

 

Συμμετοχή  στα  ακόλουθα  ερευνητικά προγράμματα ως Επιστημονικός Υπεύθυνος ή ως Κύριος Ερευνητής :    

1.             “Aspects of formability of thin cold rolled steel sheet with variable microstructure and coatings” (ECSC)

2.            “Εύκαμπτα συστήματα κατεργασιών με ρομπότ για νέες μεθόδους  κατεργασιών των  υλικών στην αυτόματη παραγωγή” (ΠΡΟΠΕ 86)

3.            “Κατεργασιμότητα μεταλλικών επιφανειών με θερμική και μηχανική πλαστική παραμόρφωση” (ΠΡΟΠΕ 86)

4.            “Application of finite element methods in hot-rolling and deep-drawing of steels” (ECSC)

5.            “Predictive techniques for the analysis and design of composite materials and structures to withstand impulsive loadings” (BRITE)

6.             “MCOES : Manufacturing Cell Operators Expert Systems” (BRITE/EURAM)

7.            “Tool design methodology for precision forging of rotational parts” (BRITE/EURAM)

8.            “Improving the biocompatibility of implants by plasma-sprayed coatings” (PHARE)

9.            “Ανάπτυξη και εφαρμογές υπεραγωγών υψηλής θερμοκρασίας” (ΕΠΕΤ ΙΙ)

10.        “Hybrid composite structures for crashworthy body shells, containers and safe transportation structures” (BRITE-EURAM)

11.        “Fabrication of advanced dense high-Tc ceramics superconductors” (ΕΠΕΤ ΙΙ)

12.        “Precision and ultra precision cutting and grinding of metals, engineering ceramics and polymers) (INCO-Copernicus)

13.        “Development of HTSC alternators combining rotating and levitating principles” (INCO-Copernicus)

14.        “Κατασκευή ηλεκτρικού συστήματος εξοικονόμησης ενέργειας με χρήση υπεραγωγών υψηλών θερμοκρασιών” (ΕΠΕΤ ΙΙ)

15.        “Προηγμένο σύστημα εξοικονόμησης ενέργειας με χρήση υπεραγωγών υψηλών θερμοκρασιών για βιομηχανικές μονάδες” (ΕΠΕΤ ΙΙ)

16.        “Κατασκευή συμπαγών κεραμικών υπεραγωγών υψηλών θερμοκρασιών προηγμένης τεχνολογίας” (ΕΠΕΤ ΙΙ)

17.        “Θεωρία βαθμίδων, στοχαστικότητα και αυτοοργάνωση: εφαρμογές σε νανοϋλικά, βιομηχανικά υλικά και βιοσυμβατά επιστρώματα” (ΠΕΝΕΔ)

18.         “Design of advanced composite production processes for the systematic manufacture of very large monocoque hybrid composite sandwich structures for the transportation sector” (GROWTH)

19.         “Crashworthiness of helicopter on water: Design of structures using advanced simulation tools” (GROWTH)

20.         “Investigation of processes of extrusion for production of bimetallic tubes with given mechanical and exploitable properties” (ΕΠΕΤ ΙΙ)

 

3.            ΕΚΠΑΙΔΕΥΤΙΚΗ ΔΡΑΣΤΗΡΙΟΤΗΤΑ

 

ΔΙΔΑΣΚΑΛΙΑ ΜΑΘΗΜΑΤΩΝ ΚΑΤΑ ΤΟ ΑΚ. ΕΤΟΣ 2003-2004

 

(α)    Χειμερινό εξάμηνο

 

·   Εισαγωγή στη Μηχανουργική Τεχνολογία (3ο εξάμηνο)

·   Κατεργασίες Ι (5ο εξάμηνο)

·   Συγκολλήσεις (7ο εξάμηνο)

·   Κατεργασίες Υλικών (ΔΠΜΣ «Επιστήμη και Τεχνολογία των Υλικών»)

·   CAM (ΔΠΜΣ «Συστήματα Αυτοματισμού», Συνδιδασκαλία με Καθηγητή Α.Γ. Μάμαλη)

 

(β)    Εαρινό εξάμηνο

 

·   Τεχνικά Υλικά (2ο εξάμηνο, Τμήμα από Α-Κ)

·   Κατεργασίες ΙΙ (6ο εξάμηνο)

·   Υπολογιστικές Μέθοδοι Κατεργασιών (8ο εξάμηνο)

·   Επιφανειακές Κατεργασίες (ΔΠΜΣ «Επιστήμη και Τεχνολογία των Υλικών», Συνδιδασκαλία με Επίκ. Καθηγήτρια Δ. Παπαδημητρίου)

·   Βιοϊατρικά Υλικά (ΠΜΣ «Βιοϊατρική Τεχνολογία», Συνδιδασκαλία με Αναπλ. Καθηγητή Δ. Παντελή)

 

ΕΠΙΒΛΕΨΗ ΔΙΔΑΚΤΟΡΙΚΩΝ ΔΙΑΤΡΙΒΩΝ

 

Επιβλέπων των διδακτορικών διατριβών των Υποψηφίων Διδακτόρων  του Τομέα Τεχνολογίας των Κατεργασιών κ.κ. Α. Μπράνη, Π. Κωστάζου, Α. Κουμούτσου και Σ. Γεωργιόπουλου.

 

4.            ΕΠΙΣΤΗΜΟΝΙΚΕΣ ΔΗΜΟΣΙΕΥΣΕΙΣ

 

Συνοψίζονται σε :

 

·        1       Διατριβή

·      62       Δημοσιεύσεις σε διεθνή έγκριτα περιοδικά

·      38       Δημοσιεύσεις σε διεθνή συνέδρια

·        1       Δημοσίευση σε ημερίδα του ΤΕΕ

·        3       Βιβλία/Μονογραφίες

 

 

A.            ΔΙΑΤΡΙΒΕΣ

 

1.           Δ.Ε. Μανωλάκος

            “Έρευνα επί της δυνατότητος εφαρμογής των μεθόδων πλαστικής αναλύσεως στη μελέτη του φαινομένου των συγκρούσεων πλοίων”

            Διατριβή επί Διδακτορία, ΕΜΠ, Αθήνα, 1983, σελ. 460.  

           

Β.            ΔΗΜΟΣΙΕΥΣΕΙΣ ΣΕ ΠΕΡΙΟΔΙΚΑ

 

1.                  D.E. Manolakos

"Lower-bound solutions for laterally loaded rectangular plates"

IABSE Proceedings, P-78/84, pp. 109/116, 1984

2.                  D.E. Manolakos and A.G. Mamalis

"On ship collisions : The plastic collapse of longitudinally framed shell plating subjected to oblique loading"

International Journal of Impact Engineering, Vol. 3, pp. 41/55, 1985

3.                  A.G. Mamalis, D.E. Manolakos, G.L.Viegelahn, N.M. Vaxevanidis and W. Johnson

On the inextentional axial collapse of thin PVC conical shells"

International Journal of Mechanical Sciences, Vol. 28, pp. 323/335, 1986

4.                  A.G. Mamalis, D.E. Manolakos, F. Saigal, G.L. Viegelahn and W. Johnson

"Extensible plastic collapse of thin wall frusta as energy absorbers"

International Journal of Mechanical Sciences, Vol. 28, pp. 219/229, 1986

5.                  A.G. Mamalis, D.E. Manolakos, G.L. Viegelahn,  N.M. Vaxevanidis  and  W. Johnson

"The inextentional collapse of grooved thin-walled cylinders of PVC under axial loading"

International Journal of Impact Engineering, Vol. 4, pp. 41/56, 1986

6.                  A.G. Mamalis, G.L. Viegelahn, D.E. Manolakos and W. Johnson

"Experimental investigation into the axial plastic collapse  of  steel thin-walled grooved tubes"

International Journal of Impact Engineering, Vol. 4, pp. 117.126, 1986

7.                  D.E. Manolakos and A.G. Mamalis

"Upper and lower bounds for rectangular plates transversely loaded"

International Journal of Mechanical Sciences, Vol. 28, pp. 815/824, 1986

8.                  D.E. Manolakos and A.G. Mamalis

"Limit analysis for laterally loaded stiffened plates"

International Journal of Mechanical Sciences, Vol. 30, pp. 441/447, 1988

9.                  A.G. Mamalis, D.E. Manolakos, G.L. Viegelahn and W. Johnson

"On the crumpling of thin plastic closed top-hat sections by compressive loading"

International Journal of Vehicle Design, Vol. 9, pp. 675/686, 1988

10.              A.G. Mamalis, D.E. Manolakos, G.L. Viegelahn and W. Johnson

"Energy absorption and deformation modes of thin PVC tubes internally grooved when subjected to axial plastic collapse"

Proc. Institution of Mechanical Engineers, Vol. 203, pp. 1/8, 1989

11.              A.G. Mamalis, D.E. Manolakos and G.L. Viegelahn

"The axial crushing of thin PVC tubes and frusta of square cross-section"

International Journal of Impact Engineering, Vol. 8, pp. 241/264, 1989

12.              A.G. Mamalis, D.E. Manolakos, G.L. Viegelahn and S. Minarecioglu

"Knautschverhalten dünnwandiger Rohre aus Kolhenstoffarmen Stahl"

Bänder-Bleche-Rohre, Vol. 30, No. 4, pp. 20/24, 1989

13.              A.G. Mamalis, D.E. Manolakos and G.L. Viegelahn

"Crashworthy characteristics of thin fibre-reinforced composite frusta under axial collapse"

International Journal of Vehicle Design, Vol. 10, pp. 165/174, 1989

14.              A.G. Mamalis, D.E. Manolakos, G.L. Viegelahn and S. Minarecioglu

"The inextentional axial  collapse  of  thin  plastic  double top-hat sections"

International Journal of Vehicle Design, Vol. 10, pp. 269/283, 1989

15.              A.G. Mamalis, D.E. Manolakos, A.K. Baldoukas and G.L. Viegelahn

"Deformation characteristics of crashworthy thin-walled steel tubes subjected to bending"

Proc. Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science, Vol. 203, pp. 411/417, 1989

16.              A.G. Mamalis, D.E. Manolakos and G.L. Viegelahn

"Crashworthy behaviour of  thin-walled  tubes  of  fibreglass  composite materials subjected to axial loading"

Journal of Composite Materials, Vol. 24, pp. 72/91, 1990

17.              A.G. Mamalis, D.E. Manolakos, A.K. Baldoukas and G.L. Viegelahn

"Bending of fibre-reinforced composite thin-walled tubes"

Composites, Vol. 21, pp. 431/438, 1990

18.              A.G. Mamalis, D.E. Manolakos, A.K. Baldoukas and G.L. Viegelahn

"Energy dissipation and associated failure  modes  when  axially loading polygonal thin-walled cylinders"

Thin-Walled Structures, Vol. 12, pp. 17/34, 1991

19.              A. G. Mamalis, D.E. Manolakos, G.A. Demosthenous and W. Johnson

"Axial plastic collapse of thin bi-material tubes as  energy  dissipating systems"

International Journal of Impact Engineering, Vol. 11, pp. 185/196, 1991

20.              A.G. Mamalis, D.E. Manolakos, G.L. Viegelahn, Sin Min Yap and G.A. Demosthenous

"On the axial crumpling of fibre-reinforced composite thin-walled conical shells"

International Journal of Vehicle Design, Vol. 12, pp. 450/467, 1991

21.              A.G. Mamalis, D.E. Manolakos, G.L. Viegelahn, G.A. Demosthenous  and  Sin Min Yap

"Microscopic failure mechanism of thin-walled fibre-reinforced  composite frusta under static axial collapse"

International Journal of Vehicle Design, Vol. 12, pp. 557/578, 1991

22.              A.G. Mamalis, D.E. Manolakos, G.L. Viegelahn, D.M. Johnson and A.K.  Baldoukas

"On the effect of shear when bending crashworthy thin-walled steel tubes"

Thin-Walled Structures, Vol. 14, pp. 153/165, 1992

23.              A.G. Mamalis, D.E. Manolakos and G.A. Demosthenous

"Crushing behaviour of thin-walled non-circular fibreglass composite tubular components due to bending"

Composites, Vol. 23, pp. 425/433, 1992

24.              A.G. Mamalis, D.E. Manolakos, G.A. Demosthenous and M.B. Ioannidis

"On the bending of automotive fibre-reinforced composite thin-walled structures"

Composites, Vol. 25, pp. 47/57, 1994

25.              A.G. Mamalis, D.E. Manolakos, G.A. Demosthenous and M.B. Ioannidis

"Axial collapse of thin-walled fibreglass composite tubular components at elevated strain rates"

Composites Engineering, Vol. 4, pp. 653/677, 1994

26.              A.G. Mamalis, D.E. Manolakos, G.A. Demosthenous and M.B. Ioannidis

”The deformation mechanism of thin-walled non-circular  composite tubes subjected to bending"

Composite Structures, Vol. 30, pp. 131/146, 1995

27.              A.G. Mamalis, D.E. Manolakos, G.A. Demosthenous and M.B. Ioannidis

"Analysis of failure mechanisms observed in axial collapse of thin-walled circular fibreglass composite tubes"

Thin-Walled Structures, Vol. 24, pp. 335/352, 1996

28.              A.G. Mamalis, D.E. Manolakos, G.A. Demosthenous and M.B. Ioannidis

"The static and dynamic axial collapse of fibreglass composite automotive frame rails"

Composite Structures, Vol. 34, pp. 77/90, 1996

29.              A.G. Mamalis, D.E. Manolakos and A.K. Baldoukas

"Finite element simulation of axisymmetric preforms for precision forming at elevated temperatures"

Journal of Materials Processing Technology, Vol. 57, pp. 103/111, 1996

30.              A.G. Mamalis, D.E. Manolakos and A.K. Baldoukas

"Simulation of the precision forging of bevel gears using implicit and explicit FE techniques"

Journal of Materials Processing Technology, Vol. 57, pp. 164/171, 1996

31.              A.G. Mamalis, D.E. Manolakos, G.A. Demosthenous and M.B. Ioannidis

"Energy absorption capability of fibreglass composite square frusta subjected to static and dynamic axial collapse"

Thin-Walled Structures, Vol. 25, pp. 269/295, 1996

32.       A.G. Mamalis, G. Pantazopoulos, A. Szalay, I. Kotsis, I. Vajda and D.E. Manolakos

“Multi-pass warm extrusion of explosively compacted ceramic superconductive 

(Y-Ba-K-Cu-O)/metal billets”

Applied Superconductivity, Vol. 4, pp. 213/229, 1996

33.             A.G. Mamalis, D.E. Manolakos and A.K. Baldoukas

“Finite-element modelling of the stretch forming of coated steels”

Journal of Materials Processing Technology, Vol. 68, pp. 71-75, 1997

34.             A.G. Mamalis, M. Robinson, D.E. Manolakos, G.A. Demosthenous, M.B. Ioannidis and J. Carruthers

“Crashwothy capability of composite material structures”

Composite Structures, Vol. 37, pp. 109/134, 1997

35.             A.G. Mamalis, I. Kotsis, G. Pantazopoulos, M. Enisz, A. Szalay and D.E. Manolakos

“The effect of heat treatment on explosively compacted (Y-Ba-K-Cu-O) superconduc-tive powders”

Physica C, Vol. 280, pp. 289/296, 1997

36.             A.G. Mamalis, D.E. Manolakos, G.A. Demosthenous and M.B. Ioannidis

“The static and dynamic axial crumbling of thin-walled fibreglass composite square tubes”

Composites Part B, Vol. 28B, pp. 439/451, 1997

37.       A.G. Mamalis, D.E. Manolakos, G.A. Demosthenous and M.B. Ioannidis

“Analytical modelling of the static and dynamic axial collapse of thin-walled fibreglass composite conical tubes”     

International Journal of Impact Engineering, Vol. 19, pp. 477/492, 1997

38.       A.G. Mamalis, D.E. Manolakos and A.K. Baldoukas

“Simulation of sheet metal forming using explicit finite-element techniques : effect of material and forming characteristics. Part 1. Deep-drawing of cylindrical cups”

Journal of Materials Processing Technology, Vol. 72, pp. 48/60, 1997

39.       A.G. Mamalis, D.E. Manolakos and A.K. Baldoukas

“Simulation of sheet metal forming using explicit finite-element techniques : effect of material and forming characteristics. Part 2. Deep-drawing of square cups”

Journal of Materials Processing Technology, Vol. 72, pp. 110/116, 1997

40.       A.G. Mamalis, D.E. Manolakos, G.A. Demosthenous and M.B. Ioannidis

“Experimental determination of splitting in axially collapsed thick-walled fibre-reinforced composite frusta”

Thin-Walled Structures, Vol. 28, pp. 279/296, 1997

41.       A.G. Mamalis, A. Szalay, N.M. Vaxevanidis and D.E. Manolakos

            “Fabrication of bi-metallic rods by explosive cladding and warm-extrusion”

Journal of Materials Processing Technology, Vol. 83, pp. 48/53, 1998

42.       A.G. Mamalis, G.L. Petrossian and D.E. Manolakos

            “The effect of porosity and microdefects on plastically deformed porous materials”

            Journal of Materials Processing Technology, Vol. 96, pp. 117/123, 1999

43.       A.G. Mamalis, G.L. Petrossian and D.E. Manolakos

            “Open-die forging of sintered cylindrical billets : An analytical approach”

            Journal of Materials Processing Technology, Vol. 96, pp. 112/116, 1999

44.       A.G. Mamalis, G.L. Petrossian and D.E. Manolakos

            “Limit design of porous sintered metal powder machine elements”

            Journal of Materials Processing Technology, Vol. 98, pp. 335/342, 2000

45.       A.G. Mamalis, D.E. Manolakos, M.B. Ioannidis and P.K. Kostazos

“The bending of fibre-reinforced composite thin-walled tubular components: Numerical modeling”

International Journal of Crashworthiness, Vol. 5, pp. 193/206, 2000

46.       A.G. Mamalis, D.E. Manolakos, M.B. Ioannidis and P.K. Kostazos

“Axial collapse of hybrid square sandwich composite tubular components with corrugated core: Experimental”

International Journal of Crashworthiness, Vol. 5, pp. 315/332, 2000

47.       A.G. Mamalis, I.N. Vottea and D.E. Manolakos

            “On the modeling of the compaction mechanism of shock compacted powders”

            Journal of Materials Processing Technology, Vol. 108, pp. 165/178, 2001

48.       A.G. Mamalis, M. Horváth, A.S. Branis and D.E. Manolakos

            “Finite element simulation of chip formation in orthogonal metal cutting”

            Journal of Materials Processing Technology, Vol. 110, pp. 19/27, 2001

49.       A.G. Mamalis, D.E. Manolakos, M.B. Ioannidis, P.K. Kostazos and G. Hassiotis

“Finite element simulation of the axial collapse of thin-wall square frusta”

International Journal of Crashworthiness, Vol. 6, pp. 155/164, 2001

50.       A.G. Mamalis, D.E. Manolakos, M.B. Ioannidis and P.K. Kostazos

“Axial crushing of hybrid square sandwich composite vehicle hollow bodyshels with reinforced core: Experimental”

International Journal of Crashworthiness, Vol. 6, pp. 363/376, 2001

51.       A.G. Mamalis, A.S. Branis and D.E. Manolakos

 “Modelling of precision hard cutting using implicit finite element techniques”

Journal of Materials Processing Technology, Vol.123, pp. 464/475, 2002

52.       A.G. Mamalis, I.N. Vottea and D.E. Manolakos

“Fabrication of metal/sheathed high-Tc superconducting composites by explosive compaction/cladding: Numerical simulation”

Materials Science and Engineering B, Vol. 90, pp.254/260, 2002

53.      A.G. Mamalis, D.E. Manolakos, M.B. Ioannidis, D.P. Papapostolou, P.K. Kostazos and D.G. Konstantinidis

“On the compression of hybrid sandwich composite panels reinforced with internal tube inserts: Experimental”

Composite Structures, Vol.56, pp. 191/199, 2002

54.       A.G. Mamalis, D.E. Manolakos, M.B. Ioannidis, P.K. Kostazos and D.P. Papapostolou

“Axial collapse of hybrid square sandwich composite tubular components with corrugated core: Numerical modelling”

Composite Structures, Vol. 58, pp.571/582, 2002

55.       A.G. Mamalis, D.E. Manolakos, M.B. Ioannidis, P.K. Kostazos and C. Chirwa

“Static and dynamic axial collapse of fiberglass composite thin-walled tubes: Finite element modeling of the crush zone”

International Journal of Crashworthines, Vol. 8, pp.247/254, 2003

56.       A.G. Mamalis, D.E. Manolakos, M.B. Ioannidis and P.K. Kostazos

“Crushing of hybrid square sandwich composite vehicle hollow bodyshells with reinforced core subjected to axial loading: Numerical simulation”

Composite Structures, Vol.61, pp.175/186, 2003

57.       A.G. Mamalis, D.E. Manolakos, M.B. Ioannidis, P.K. Kostazos and C. Dimitriou

“Finite element simulation of the axial collapse of metallic thin-walled tubes with octagonal cross-section”

Thin-Walled Structures, Vol.41, pp.891/900, 2003

58.              A.G. Mamalis, J. Kundràk, D.E. Manolakos, K. Gyàni and A. Markopoulos

             “Thermal modelling of surface grinding using implict finite element techniques”

             International Journal of Advanced Manufacturing Technology, Vol.21, pp.929/934, 2003

59.       A.G. Mamalis, D.E. Manolakos, M.B. Ioannidis and D.P. Papapostolou

“Crashworthy characteristics of axially statically compressed thin-walled square CFRP composite tubes: Experimental”

Composite Structures, (υπό δημοσίευση)

60.       A.G. Mamalis, D.E. Manolakos, A.G. Kladas and A.K. Koumoutsos

            “Electromagnetic forming and powder processing : Trends and developments”

            Applied Mechanics Reviews, (υπό δημοσίευση)

61.       A.G. Mamalis, D.E. Manolakos, M.B. Ioannidis, A. Markopoulos and I.N. Vottea

“Simulation of advanced manufacturing of solids and porous materials”

International Journal for Manufacturig Science and Production, Vol. 5, No. 3, pp. 111-130, 2003

62.       A.G. Mamalis, J. Kundràk, D.E. Manolakos, A. Markopoulos and M. Horváth

“Effect of the workpiece material on the heat affected zones during grinding: Numerical simulation”

International Journal of Advanced Manufacturing Technology, 22 (11 &12), pp. 761-767, 2003

 

Γ.            ΔΗΜΟΣΙΕΥΣΕΙΣ ΣΕ ΣΥΝΕΔΡΙΑ/ΗΜΕΡΙΔΕΣ

 

1.                  Α.G. Mamalis, L.P. Hatzikonstantis, A.J. Zavaliangos, G.C. Vosniakos  and  D.E. Manolakos

"Evaluation of the m-yield criterion of anisotropic sheet metals in predicting limit strains"

Proc. 3rd International Conference in CAD/CAM and FEM in Metal Working,  Stafford, U.K., April 1987; "CAD/CAM and FEM in Metal Working", Eds. S.K. Ghosh and A. Niku'Lari, Pergamon Press, 1988, pp. 121/141

2.                  A.G. Mamalis, D.E. Manolakos, G.L. Viegelahn and W. Johnson

"The modelling of the  progressive extensible plastic collapse of thin-wall shells"

International Symposium on Structural Failure, MIT, Boston, June 1988.

International Journal of Mechanical Sciences, Vol. 30, pp. 249/261, 1988

3.                  A.G. Mamalis, D.E. Manolakos, G.A. Demosthenous and M.B. Ioannidis

"Crashworthy characteristics of fibreglass composite automotive frame rails subjected to bending and axial collapse"

Proc. 27th ISATA Conference on New and Alternative Materials for the Transportation Industries, Aachen, Germany, October 1994, pp. 371/379

4.                  A.G. Mamalis, D.M. Manolakos and A.K. Baldoukas

"Application of an explicit finite  element model in deep-drawing of cylindrical cups of coated steels"

Proc. 2nd International Conference on Sheet Metal Forming,  Belfast,  April  1994,  Eds. V.P. Singh, B. Shirvani and H.J.J. Kals, pp. 153/163

5.                  A.G. Mamalis, D.E. Manolakos and A.K. Baldoukas

"On the finite element modelling of the deep-drawing of square sections of coated sheet steels"

2nd Asia-Pasific Conference on Materials Processing, Singapore,  November 1994

Journal of Materials Processing Technology, Vol. 58, pp. 153/159, 1996

6.         Α.Γ. Μάμαλης, Δ.Ε. Μανωλάκος και N.M. Bαξεβανίδης

“Πιστότητα επιφανείας κατεργασίμου υλικού με μηχανική επιφανειακή πλαστική παραμόρφωση"

TEE, Hμερίδα "Eιδικές Επιφανειακές Κατεργασίες : Tεχνολογία και εφαρμογές στην Ελλάδα", Mάρτιος 1995

Τεχνικά, τεύχος 117, σελ. 19/27, 1996

7.         A.G. Mamalis, D.E. Manolakos, G.A. Demosthenous and M.B. Ioannidis

            Analytical and experimental approach to damage and residual strength  of fibreglass composite automotive frame rails during manufacturing"

            Proc. 8th International Conference on Composite  Structures,  Paisley,  Scotland,  September 1995

            Composite Structures, Vol. 32, pp.325/330, 1995

8.          Α. Barbagelata, A.G. Mamalis, D.E. Manolakos, A.M. Robinson, A.E.D. Walters

            “Hybrid composite structures for crashworthy safe transportation systems”

Proc. 30th ISATA Conference on Crash Behaviour of Lightweight Materials and Structures, Florence, Italy,  June 1997, pp. 657/664

9.         A.G. Mamalis, D.E. Manolakos, M.B. Ioannidis and P.K. Kostazos

“Modelling of the crush zone of axially loaded thin-walled tubular components using explicit finite element techniques”

Proc. 31st ISATA Conference on Materials for Energy-Efficient Vehicles, Düsseldorf, Germany, June 1998, pp. 113/121

10.             A.G. Mamalis, D.E. Manolakos, M.B. Ioannidis and P.K. Kostazos

“Finite element modelling of the dcrush zone of fibreglass composite thin-walled tubes subjected to static and dynamic axial loading”

Proc. 5th International Conference on Composites Engineering (ICCE/5),  Las Vegas, Nevada, USA, July 1998

11.       A.G. Mamalis, D.E. Manolakos, M.B. Ioannidis, P.K. Kostazos and M. Robinson

“On the static axial collapse of square composite rail vehicle hollow body shells”

Proc. 4th Seminar on Experimental Techniques and Design in Composite Materials, Sheffield, U.K., September 1998;

In: “Experimental Techniques and Design in Composite Materials 4”, Ed. M. Found, Swets and Zeitlinger, Lisse, Holland, 2002, pp. 87/92

12.       A.G. Mamalis, D.E. Manolakos, M.B. Ioannidis and P.K. Kostazos

“Simulation of bending of fiberglass composite thin-walled tubular components using implicit finite element techniques”

Proc. 6th International Conference on Composites, ICCE/6, Orlando, USA, June 1999, pp. 541/542.

13.       A.G. Mamalis, A. Szalay, D.E. Manolakos and N.M. Vaxevanidis

            “Fabrication of Ni-Ti bimetallic rods by explosive powder compaction and extrusion”

            Proc. 6th International Conference on Technology of Plasticity (ICTP), Nürnberg, Germany, September 1999, “Advanced Technology of Plasticity”, Ed. M. Geiger, Springer Verlag, Vol. 2, pp. 1339/1344, 1999

14.       A.G. Mamalis, D.E. Manolakos, M.B. Ioannidis, P.K. Kostazos and K. Dedes

“Finite element simulation of the collapse modes of axially dynamically loaded thin-walled metallic rectangular tubular components”

Proc. 32nd ISATA Conference on Materials for Energy Efficient Vehicles, Vienna, Austria, June 1999, pp. 253/259

15.       A.G. Mamalis, I.N. Vottea and D.E. Manolakos

“Finite element modeling of the explosive compaction of powders”

Proc. 5th International Summer School on High Temperature Superconductivity (5thISSHTS), Eger, Hungary, July 1999

16.       A.G. Mamalis, I.N. Vottea and D.E. Manolakos

            “On the modeling of the compaction mechanism of shock compacted powders”

Proc. 1st Japanese-Greek Workshop on Superconductivity and Magnetic Materials (JGNSM’99), Athens, Greece, May 1999, pp.71/92.        

17.       A.G. Mamalis, D.E. Manolakos and M.B. Ioannidis

“Bending fatigue of fibre-reinforced epoxy composites”

Proc. ISATA 2000 Conference, Dublin, Ireland, September 2000, pp. 209/215

18.       A.G. Mamalis, I. Vottea and D. Manolakos

            “Numerical simulation of explosively compacted superconducting powders”

Proc. 6th International Conference on Materials and Mechanisms of Superconductivity and High Temperature Superconductors, Houston, Texas, USA, February 2000, Physica C, Vol. 341-348, pp. 2433/2434, 2000

19.       A.G. Mamalis, D.E. Manolakos, M.B. Ioannidis, P.K. Kostazos and G. Hassiotis

“Finite element simulation of the axial collapse of thin-wall square frusta”

Proc. International Conference Icrash 2000, London, U.K., September 2000, pp. 483/492

20.       A.G. Mamalis, I.N. Vottea and D.E. Manolakos

“Simulation of the explosive compaction of superconducting powders using explicit finite element techniques”

Proc. 6th International Summer School on High Temperature Superconductivity (Workshop), Eger, Hungary, July 2000

21.       A.G. Mamalis, I. Vottea, D.E. Manolakos, A. Szalay and G. Desgardin

“On the numerical simulation of shock compacted metal sheathed high-Tc superconducting billets”

Proc. EXPLOMET 2000 Conference, Albuquerque, New Mexico, USA, June 2000, in: “Fundamental Issues and Applications of Shock-Wave and High-Strain-Rate Phenomena”, Eds K.P. Staudhammer, L.E. Murr, M.A. Meyers, Elsevier, New York, 2001, pp. 289/295

22.       G.-C. Vosniakos, D.E. Manolakos, T. Giannakakis and P.K. Kostazos

Manufacturing intelligence computing concepts in planning sheet metal forming operations

Proc. 1st National Conference on Recent Advances in Mechanical Engineering, ASME-Greek Section, Patras, Greece, September 2001.

23.       A.G. Mamalis, I.N. Vottea and D.E. Manolakos

“Numerical simulation of the explosive compaction/cladding of grooved YBCO metal/ plates”

Proc. 2nd Japanese/ Greek Joint Workshop on Superconductivity and Magnetic Materials, Oita, May 2001;

In “Superconductivity and Magnetic Materials”, Eds. M. Enokizono and A.G. Mamalis, JAESM Studies in Applied Electromagnetics and Mechanics, Vol. 12, pp. 132/138, 2001

24.       A.G. Mamalis, D.E. Manolakos, M.B. Ioannidis and P.K. Kostazos

“Axial crushing of hybrid square sandwich composite vehicle hollow bodyshells”

Proc., Automotive and Transportation Techology Congress and Exhibition, ATTCE 2001, Barcelona, Spain, October 2001, Vol. 4, pp. 133/138

25.              A.G. Mamalis, D.E. Manolakos, M.B. Ioannidis, P.K. Kostazos, A.  Goulielmos and G. Demosthenous

“Finite element simulation of internally grooved thin-wall PVC tubes subjected to axial collapse”

            Proc. ICrash Conference, Melbourne, Australia, February 2002;

26.              A.G. Mamalis, D.E. Manolakos, M.B. Ioannidis, P.K. Kostazos and S.N. Kastanias

“Numerical modelling of the axial plastic collapse of externally grooved steel thin-walled tubes”

           Proc. ICrash Conference Melbourne, Australia, February 2002;

27.              A.K. Baldoukas, G.A. Demosthenous and D,E, Manolakos

“Experimental evaluation of the 6xxx series aluminium alloys extrudability”

Proc. JSME/ASME International Conference on Materials and Processing, Honolulu, Hawaii, October 2002

28.              G.A. Demosthenous, D,E, Manolakos, A.K. Baldoukas and C.N. Kyriakou

“The effect of moisture on the fatigue behaviour of fibre-reinforced composite materials”

Proc. JSME/ASME International Conference on Materials and Processing, Honolulu, Hawaii, October 2002

29.              A.G. Mamalis, I.N. Vottea, D.E. Manolakos, A. Szálay and A. Kladas

            “Numerical simulation of explosive consolidation of superconducting bulk componets”

            Proc. 4th International Conference on New Theories, Discoveries and Applications of Superconductors and Related Materials (New 3SC-4), San Diego, California, USA, January 2003;

International Journal of Modern Physics B, Vol.17, pp3563/3568, 2003

30.       A.G. Mamalis, J. Kundrak, D.E. Manolakos, A. Markopoulos and G. Chrisstoforou

         “Numerical analysis of surface grinding: Comparison between 2D and 3D modelling”

            Proc. International Scientific Conference MicroCAD 2003, Miskolc, Hungary, March 2003, pp155/160

31.       A.G. Mamalis, I.N. Vottea, D.E. Manolakos, A.Szálay and F. Marquis

            “Exposive compaction/cladding of YBCO discs: A numerical approach”

Proc. 3rd Japanese/Mediterranean Joint Workshop on Superconductivity and Magnetic Materials JAPMED `03, Athens, Greece, May 2003;

32.       A. G. Mamalis, D.E. Manolakos, A. G. Kladas and A. K. Koumoutsos

            “Physical properties of electromagnetic forming process: A constitutive finite element model”

            Proc. 3rd Japanese/Mediterranean Joint Workshop on Superconductivity and Magnetic Materials JAPMED`03, Athens, Greece, May 2003;

33.       A.G. Mamalis, I.N. Vottea and D.E. Manolakos

            “Explosive compaction/cladding of metal sheathed/superconducting grooved plates: FE modelling and validation”

            Proc. 7th International Conference on Materials and Mechanisms of Suerconductors, Rio de Janeiro, Brasil, May 2003;

34.       A.G. Mamalis, F.S.D. Marquis, D.E. Manolakos and I.N. Vottea

“Finite element modelling of the explosive compaction / cladding of aluminium        sheathed/SSR YBCO discs”,

Proc. Symposium on Powder Materials: Current Research and Industrial Practices, Chicago, Illinois, USA, November 2003

35.       A.G. Mamalis, I.N. Vottea and D.E. Manolakos

“Application of explicit FE techniques on the explosive compaction/cladding of high-tmperature superconductors”

Proc. 1st International Symposium on Explosion, Shock Wave and Hypervelocity Phenomena, Kumamoto, Japan, March 2004

36.       A.G.  Mamalis, D.E. Manolakos, M.B. Ioannidis and P.K. Kostazos

“On the static and dynamic axial loading of thin-walled CFRP composite tubular components”

8th International Conference on Structures under Shock and Impact, Crete, Greece, March 2004

37.       A.G. Mamalis, A.Szalay, D.E. Manolakos and M.N Vaxevanidis

            “Fabrication of composite metal laminates by explosive cladding”

8th International Conference on Structures under Shock and Impact, Crete, Greece, March 2004

38.       A.G. Mamalis, D.E. Manolakos, M.B. Ioannidis and P.K. Kostazos

“Numerical simulation of thin-walled metallic circular frusta subjected to axial loading”

Icrash 2004, International Crashworthiness, San Francisco, USA, July 2004

39.       A.G. Mamalis, D.E. Manolakos, M.B. Ioannidis and P.K. Kostazos

            “Bending of cylindrical steel tubes: Numericall modeling”

Icrash 2004, International Crashworthiness, San Francisco, USA, July 2004

           

Δ.            ΜΟΝΟΓΡΑΦΙΕΣ/ΒΙΒΛΙΑ

 

1.                  Α.G. Mamalis, D.E. Manolakos and G.L. Viegelahn

            "Deformation Characteristics of Crashworthy Components"

            Fortschritt-Berichte der VDI-Zeitschriften, Reihe 18, Nr. 62, Düsseldorf, 1989, pp. 343

2.          A.G. Mamalis, D.E. Manolakos, G.A. Demosthenous and M.B. Ioannidis

            “Crashworthiness of Composite Thin-Walled Structural Components”

            Technomic Publishing Company, Inc., Lancaster, USA, 1998

3.                 A.G. Mamalis, G. Pantazopoulos, D.E. Manolakos and A. Szalay

            “Processing of High-Tc Superconductors at High Strain Rates”

            Technomic Publishing Company, Inc., Lancaster, USA, 1999