Äçìïóéåýóåéò óå ÄéåèíÞ óõíÝäñéá ìå ðëÞñç
êñßóç |
Ä103. V. Iliopoulou, G.-C. Vosniakos, Injection molding control parameter assessment by nested Taguchi design of simulation experiments: a case study, International ESAFORM Conference 2024, 24-26 April 2024, Toulouse, France, Materials Research Proceedings, Vol. 41, 2023, pp. 2757-2766 doi: 10.21741/9781644903131-302.
Ä102. P. Spanidis, G.-C. Vosniakos, Redesgin of
metal parts for Additive Manufacturing: a review of case studies, 32nd
International Conference of Manufacturing Systems (ICMaS) 2023
(ICMaS2023), 16 November 2023, Bucharest, Romania, Proceedings in Manufacturing
Systems, Vol. 18, No 1, pp 17-24.
Ä101. G.-C. Vosniakos, E. Stathas, Exploring
collboration of humans with industrial robots using ROS based simulation, 32nd
International Conference of Manufacturing Systems (ICMaS) 2023
(ICMaS2023), 16 November 2023, Bucharest, Romania, Proceedings in Manufacturing
Systems, Vol. 18, No 1, pp 33-38.
Ä100. A. Ioannidis, M. Boufali, G.-C. Vosniakos,
T. Anagnostakis, Development of a low-cost extrusion-based 3D printer for high
performance engineering polymers, 10th Manufacturing Engineering Society
International Conference 2023 (MESIC2023), 28-30 June 2023, Sevilla, Spain, Key
Egineering Materials, Vol. 960, pp. 37-45, doi: 10.4028/p-qO8OUM.
Ä99. A. Vasileiou,
G.-C. Vosniakos, D. Pantelis, Determination of heat transfer coefficient in
casting: a comparison of analytical, inverse and trial-and-error methods, 10th
Manufacturing Engineering Society International Conference 2023 (MESIC2023),
28-30 June 2023, Sevilla, Spain, Key Egineering Materials, Vol. 955,pp. 15-22,
doi: 10.4028/p-tuDiG1.
Ä98. A. Iliopoulos, G.-C. Vosniakos,
Optimisation of CNC machining part programs exemplified for rough-milling of
pockets, 32nd International Conference on Flexible Automation and Intelligent
Manufacturing, 18-23 June 2023, Porto, Portugal, Lecture Notes in Mechanical
Engineering, pp. 257-264, doi: 10.1007/978-3-031-38241-3_29.
Ä97. N. Manou,
G.-C. Vosniakos, P. Kostazos, 3D Printing of Polycaprolactone Scaffolds with
Heterogenous Pore Size for Living Tissue Regeneration, 32nd International
Conference on Flexible Automation and Intelligent Manufacturing, 18-23 June
2023, Porto, Portugal, Lecture Notes in Mechanical Engineering, pp. 345-353,
doi: 10.1007/978-3-031-38241-3_39.
Ä96. C. Angelidou, E. Stathatos, G.-C.
Vosniakos, On Reinforcement Learning for Part Dispatching in UAV-served Flexible
Manufacturing Systems, 32nd International Conference on Flexible Automation and
Intelligent Manufacturing, 18-23 June 2023, Porto, Portugal, Lecture Notes in
Mechanical Engineering, pp. 486-494, doi: 10.1007/978-3-031-38165-2_57.
Ä95. P.
Savvakis, G.-C. Vosniakos, E. Stathatos, A. Debar, M. Chodnicki, P. Benardos,
UWB-based Indoor Navigation in a Flexible Manufacturing System using a Custom
Quadrotor UAV, 32nd International Conference on Flexible Automation and
Intelligent Manufacturing, 18-23 June 2023, Porto, Portugal, Lecture Notes in
Mechanical Engineering, pp. 91-98, doi: 10.1007/978-3-031-38241-3_11.
Ä94. G. Papazetis,
E. Tzimas, P. Benardos, G.-C. Vosniakos, Development of a Robot-based Handling
System for a High Precision Manufacturing Cell, 32nd International Conference on
Flexible Automation and Intelligent Manufacturing, 18-23 June 2023, Porto,
Portugal, Lecture Notes in Mechanical Engineering, pp. 29-36, doi:
10.1007/978-3-031-38241-3_4.
Ä92. D.K. Rissaki, A.N. Vasileiou, M.C. Smith, O. Muransky, P.G. Benardos, G.-C. Vosniakos, Establishing n automated heatsource calibration framework, Mathematical modelling of weld phenomena: Proc. 13th International Seminar Numerical Analysis of Weldability, Eds C. Sommitsch, N. Enzinger, P. Mayr, 4-7/9 2022, Graz - Schloss Seggau – Austria, doi: 0.3217/978-3-85125-968-1-12.
Ä91.
A. Vasileiou, G.-C. Vosniakos, D.I. Pantelis, ,
Investigating the suitability of using a single heat transfer coefficient in
metal casting simulation: An inverse approach, Proc. International ESAFORM
Conference 2023, 19-21 April 2023, Kraków, Poland, Materials Research
Proceedings, Vol. 28, 2023, pp. 1175-1182 doi: 10.21741/9781644902479-128.
Ä90.
G.-C. Vosniakos, P.J. Dimakopoulos, A.
Vasileiou, An Inverse method for determining fabric permeability in vacuum
assisted resin infusion for composite parts forming, Proc. International ESAFORM
Conference 2023, 19-21 April 2023, Kraków, Poland, Materials Research
Proceedings, Vol. 28, 2023, pp. 407-416, DOI: 10.21741/9781644902479-45.
Ä89.
G. Sotirchos, G.-C. Vosniakos, Development of a
programmable work-holding fixture for laser welding of solar absorber sheets,
31st International Conference of Manufacturing Systems (ICMaS)
2022 (ICMaS2022), 10 November 2022, Bucharest,
Romania, Proceedings in Manufacturing Systems, Vol. 17, No 1, pp 9-16.
Ä88.
G.-C. Vosniakos, I. Pieratos, T. Mitropoulos,
P. Avrampos, Preliminary investigation on undamped open loop control of a
polishing jig fro machining centres, 31st International Conference of
Manufacturing Systems (ICMaS)
2022 (ICMaS2022), 10 November 2022, Bucharest,
Romania, Proceedings in Manufacturing Systems, Vol. 17, No 1, pp 3-8.
Ä87.
G.-C. Vosniakos, X.V. Gogouvitis, E. Panos,
Preliminary manufacturing cell design in digital factory, 31st International
Conference on Flexible Automation and Intelligent Manufacturing (FAIM2022),
Detroit, USA, 19-23 June 2022, Lecture Notes in Mechanical Engineering, pp. 8.
doi: 10.1007/978-3-031-17629-6_48.
Ä86.
G.-C. Vosniakos, E. Manou, Quality control of
die castings by machine vision: a case study exploiting classic and machine
learning techniques, 31st International Conference on Flexible Automation and
Intelligent Manufacturing (FAIM2022), Detroit, USA, 19-23 June 2022, Lecture
Notes in Mechanical Engineering, pp. 8.
doi: 10.1007/978-3-031-17629-6_65.
Ä85.
G.-C. Vosniakos, E. Lekai, G. Maltezos, On the
mechanical design of a customized Unmanned Aerial Vehicle transporter for
Flexible Manufacturing Systems, Proc. 10th IFAC Conference on Manufacturing
Modelling, Management and Control (MIM2022), June 22-24, 2022. Nantes, France,
pp. 988-993. doi: doi: 10.1016/j.ifacol.2022.09.485.
Ä84.
G.-C. Vosniakos, G. Maltezos, A feasibility
study on Unmanned Aerial Vehicle navigation and docking for materials
transportation in manufacturing systems, Proc. 10th IFAC Conference on
Manufacturing Modelling, Management and Control (MIM2022), June 22-24, 2022.
Nantes, France, pp. 969-974. doi: 10.1016/j.ifacol.2022.09.477.
Ä83.
Z. Papagianni, G.-C. Vosniakos, Surface defects
detection on pressure die castings by machine learning based on machine vision,
5th International Conference on Design, Simulation, Manufacturing: The
Innovation Exchange, DSMIE-2022, June 7-10, 2022, Poznan, Poland – Lecture Notes
in Mechanical Engineering, Volume 1: Design, Simulation, Manufacturing: The
Innovation Exchange, pp. 51-61, Springer, Cham, doi:
10.1007/978-3-031-06025-0_6.
Ä82.
G. Vasilopoulos, G.-C. Vosniakos, Preliminary
design of assembly system and operations for large mechanical products using a
game engine, 54th CIRP CMS 2021 - Towards Digitalized Manufacturing 4.0 (D.
Mourtzis, ed.), Procedia CIRP, Vol. 104, 2021, pp. 1395-1400, doi:
10.1016/j.procir.2021.11.235.
Ä81.
E. Stathatos, G.-C. Vosniakos, Comparison of
nominal and real 2D contours of manufactured products using Ant Colony
Optimisation of shape landmarks, 30th International Conference on Flexible
Automation and Intelligent Manufacturing (FAIM2021), Athens, Greece, 15-18 June
2021, Procedia Manufacturing, Vol. 55 (2021), pp. 154-159 (gold open access),
DOI: 10.1016/j.promfg.2021.10.022.
Ä80.
I. Sideris, G.-C. Vosniakos, A simulation study
of local powder bed gas shielding in Selective Laser Sintering / Melting
machines, 30th International Conference on Flexible Automation and Intelligent
Manufacturing (FAIM2021), Athens, Greece, 15-18 June 2021, Procedia
Manufacturing, Vol. 55 (2021), pp. 88–95 (gold open access), DOI:
10.1016/j.promfg.2021.10.013.
Ä79.
D. Vlagkoulis, A. Vasileiou, G.-C. Vosniakos, A
study on casting of structural mesh-like metal parts, IManEE 2020 Conference,
IOP Conf. Series: Materials Science and Engineering 1037 (2021) 012017,
DOI:10.1088/1757-899X/1037/1/012017.
Ä78.
M. Deja, M.S. Siemiątkowski, G.-C. Vosniakos,
G. Maltezos, Opportunities and challenges for exploiting drones in agile
manufacturing systems, 30th International Conference on Flexible Automation and
Intelligent Manufacturing (FAIM2021) in Athens, Greece, 15-18 June 2021,
Procedia Manufacturing, Vol. 51 (2020), pp. 527–534 (gold open access) DOI:
10.1016/j.promfg.2020.10.074.
Ä77.
P. Avrampos, G.-C. Vosniakos, Á prototype
powder deposition system for an open Selective Laser Sintering machine, 30th
International Conference on Flexible Automation and Intelligent Manufacturing
(FAIM2021) in Athens, Greece, 15-18 June 2021, Procedia Manufacturing, Vol. 51
(2020), pp. 755–762 (gold open access) DOI: 10.1016/j.promfg.2020.10.106.
Ä76.
S. Pasalopoulos, P. Avrampos, G.-C. Vosniakos,
Surface quality evaluation of non-sintered powder layers in Selective Laser
Sintering by 3D scanning, 30th International Conference on Flexible Automation
and Intelligent Manufacturing (FAIM2021) in Athens, Greece, 15-18 June 2021,
Procedia Manufacturing, Vol. 51 (2020), pp. 748–754 (gold open access) DOI:
10.1016/j.promfg.2020.10.105.
Ä75.
A. Dimitrokalli, G-C. Vosniakos, D. Nathanael
and E. Matsas On the assessment of human-robot collaboration in mechanical
product assembly by use of Virtual Reality, 30th International Conference on
Flexible Automation and Intelligent Manufacturing (FAIM2021) in Athens, Greece,
15-18 June 2021, Procedia Manufacturing, Vol. 51 (2020), pp. 627–634 (gold open
access) DOI: 10.1016/j.promfg.2020.10.088.
Ä74. P. Filippidis, G. Vosniakos and
G. Papazetis, Process parameter investigation for 3D printing of cellular
structured parts, 30th International Conference on Flexible Automation and
Intelligent Manufacturing (FAIM2021), June 15-18, 2021, Athens, Greece, in
Procedia Manufacturing, Vol. 51, 2020, pp. 717–724 (gold open access) doi:
10.1016/j.promfg.2020.10.101.
Ä73. N. Lambos, G. Vosniakos and G.
Papazetis, Low-cost automatic identification of nozzle clogging in material
extrusion 3D printers, 30th International Conference on Flexible Automation and
Intelligent Manufacturing (FAIM2021), June 15-18, 2021, Athens, Greece, Procedia
Manufacturing, Vol. 51, 2020, pp. 274–279, doi: 10.1016/j.promfg.2020.10.039.
D72. G. -C. Vosniakos, A. Parousi,
G. Leivadiotakis, L. Blein, C. Lassime, Task-oriented off-line programming of an
industrial robot serving CNC lathes, 28th International Conference of
Manufacturing Systems (ICMaS)
2019 (ICMaS2019), 14-15 November 2019,
Bucharest, Romania, Proceedings in Manufacturing Systems, Vol. 14, No 1, pp
9-14.
Ä69.
C. Drakos and G.-C. Vosniakos, Manufacturing
performance improvement of complex products based on coding and parametrisation:
a case study, International Conference on Manufacturing Systems 2018
(ICMaS2018), 15-16 November 2018, Bucharest, Romania, Proceedings in
Manufacturing Systems, Vol. 13, No 1, pp 27-32.
Ä68.
A. Dine and G.-C. Vosniakos, On the development
of a robot-operated 3D-printer, 28th International Conference on Flexible
Automation and Intelligent Manufacturing, FAIM2018, 11-14 June 2018, Columbus,
Ohio, USA, Proceedia Manufacturing, Vol. 17, 2018, pp. 6-13, DOI:
10.1016/j.promfg.2018.10.004.
Ä67. I. Koustas, T. Papingiotis,
G.-C. Vosniakos, A. Dine, On the development of a filament winding robotic
system, 28th International Conference on Flexible Automation and Intelligent
Manufacturing, FAIM2018, 11-14 June 2018, Columbus, Ohio, USA, Proceedia
Manufacturing, Vol. 17, 2018, pp. 6-13, DOI: 10.1016/j.promfg.2018.10.145.
Ä66.
E. Nikolidakis and G.-C. Vosniakos, A novel
tool clamping system for CNC press brakes, International Conference on
Manufacturing Systems 2017 (ICMaS2017), 9-10 November 2017, Bucharest, Romania,
published in: Proceedings in Manufacturing Systems, Vol. 12, No 2, pp 59-64.
Ä65.
G.-C.Vosniakos, J. Deville, E. Matsas, On
immersive Virtual Environments for assessing human-driven assembly of large
mechanical parts, 27th International Conference on Flexible Automation and
Intelligent Manufacturing, FAIM2017, 27-30 June 2017, Modena, Italy, Proceedia
Manufacturing, Vol. 11, 2017, pp. 1263-1270, DOI: 10.1016/j.promfg.2017.07.253.
Ä64.
A.N. Vasileiou, G.-C. Vosniakos , D.I.
Pantelis, On the feasibility of determining the Heat Transfer Coefficient in
casting simulations by Genetic Algorithms, 27th International Conference on
Flexible Automation and Intelligent Manufacturing, FAIM2017, 27-30 June 2017,
Modena, Italy, Proceedia Manufacturing, Vol. 11, 2017, pp. 509–516, DOI:
10.1016/j.promfg.2017.07.144.
Ä63.
E. Stathatos, G.-C. Vosniakos and D. Pantelis,
Prediction of Crater Size in Drilling and Texturing by Pulsed Laser Ablation,
9th International Congress on Precision Machining,
6-9 September 2017, Athens, Greece, Solid State
Phenomena, vol. 261, pp. 129-134, DOI: 10.4028/www.scientific.net/SSP.261.129.
Ä62.
P. G. Benardos and G.-C. Vosniakos, Internet of
Things and industrial applications for precision machining, 9th International
Congress on Precision Machining,
6-9 September 2017, Athens, Greece, Solid State
Phenomena, vol. 261, pp. 440-447, DOI: 10.4028/www.scientific.net/SSP.261.440.
Ä61.
T. Mitropoulos, P. Avrampos and G.-C.
Vosniakos, Development of a Polishing Jig for Machining Centres, 9th
International Congress on Precision Machining,
6-9 September 2017, Athens, Greece, Solid State
Phenomena, vol. 261, pp. 167-172, DOI: 10.4028/www.scientific.net/SSP.261.167.
Ä60.
E. Matsas, G. Vosniakos and D. Batras, Modelling Simple Human-Robot
Collaborative Manufacturing Tasks in Interactive Virtual Environments, 18th VRIC
Laval Virtual 2016, 23-27 March 2016, ACM Digital Library, Article No 20, p. 4,
DOI: 10.1145/2927929.2927948.
Ä59.
I. Kyriopoulou, G.-C. Vosniakos , D. I.
Pantelis and P. G. Benardos, Process parameter selection using Neural Networks
for laser milling of wood, Proceedings of FAIM2015 Conference, 23-26 June 2015,
Wolverhampton, Britain, pp. 90-97.
Ä58.
P.P. Psyllaki, D.I. Pantelis and G.-C.
Vosniakos, Nd:YAG laser surface micro-modification of tool steels, Proceedings
5th International Conference on Manufacturing Engineering (ICMEN), Halkidiki,
1-3 October 2014, pp. 343-350.
Ä57.
E. Matsas, D. Batras and G.-C. Vosniakos,
Beware of the robot: a highly interactive and immersive Virtual Reality training
application in robotic manufacturing systems, International Conference on
Advances in Production Management Systems (APMS) 2012, 24-26 September 2012,
Rhodes, Greece, pp. 606-613.
Ä56.
G.-C. Vosniakos, M. Karyotis, Structural
improvement of hydraulic shearing machine, Proceedings of the 22nd International
DAAAM Symposium, 23-26 November 2011, Vienna, Austria, pp. 443-444.
Ä55.
G.-C. Vosniakos, A. Vassiliou and S. Tsekouras,
Numerical Simulation of sand casting of an aluminium part, Proceedings of the
22nd International DAAAM Symposium, 23-26 November 2011, Vienna, Austria, pp.
445-446.
Ä54.
D. Nathanael, G.-C. Vosniakos and S. Mosialos,
Cognitive task analysis for Virtual Reality Training: the case of CNC tool
offsetting, Proceedings of ECCE 2010 Conference, 25-27 August 2010, Delft, The
Netherlands, pp. 241-244.
Ä53.
N. Kontolatis, G.-C. Vosniakos and K.
Kyriakopoulos, On parametric toolpath design of a robot serving a press-brake,
Proceedings of FAIM2009 Conference, 6-8 July, Middlesbrough, Britain, pp.
139-146.
Ä52.
A. Gatsou, X. Gogouvitis, G.-C. Vosniakos, C.
Wagenknecht and J.-C. Aurich, Discrete event simulation for manufacturing system
analysis: an industrial case study, Proceedings of FAIM2009 Conference, 6-8 July
2009, Middlesbrough, Britain, p. 1309-1316
Ä51.
X.V. Gogouvitis and G.-C. Vosniakos, Virtual
reality modelling of manufacturing systems based on ontologies, Proceedings of
DET2008, 5th International Conference on Digital Enterprise Technology, 22-24
October 2008, Nantes, France, pp. 13.
Ä50.
G.-C. Vosniakos, X. Gogouvitis, B. Fidler and
S. Valcuha, Preliminary technical design methodology of manufacturing systems,
Proceedings 19th International DAAAM symposium "Intelligent Manufacturing &
Automation: Focus on Next Generation of Intelligent Systems and Solutions",
Trnava, Slovakia, 22-25th October 2008, pp. 754755.
Ä49.
A.N. Vassiliou, D.I. Pantelis and G.-C.
Vosniakos, Investigation of centrifugal casting conditions influence on part
quality, Proceedings 3rd International Conference on Manufacturing Engineering
(ICMEN), Halkidiki, 1-3 October 2008, pp. 347-356.
Ä48.
T. Giannakakis, G.-C.Vosniakos and D. Pantelis,
Integrating design and production of precision traditional ceramics, Proceedings
3rd International Conference on Manufacturing Engineering (ICMEN), Halkidiki,
1-3 October 2008, pp. 747-756.
Ä47.
X.V. Gogouvitis and G.-C. Vosniakos, Virtual
Reality modelling concepts of automated manufacturing systems, Proceedings FAIM
2008 Conference , 30 June-2 July 2008, Skővde, Sweden, pp. 955-962.
Ä46.
G.-C. Vosniakos , T. Giannakakis, X. Gogouvitis
and A. Papantoniou, Simulation-based linked design and manufacturing decisions
in PLM : a case study, Proceedings FAIM 2008 Conference, 30 June-2 July 2008,
Skővde, Sweden, pp. 171-178.
Ä45.
B. Fidler, Š. Valčuha, G.-C. Vosniakos and X.V.
Gogouvitis, Konfigurácia virtuálneho podniku s využitím skupinovej technológie
(Virtual Enterprises’ configuration using principles of Group Technology), 11th
International Scientific Conference on Mechanical Engineering, 29-30 November
2007, Slovak University of Technology, Bratislava, Slovakia, p. 14.
Ä44.
G.-C. Vosniakos, G.-M. Haziris and X. Gogouvitis, ‘A study on using ANNs
in EDM process planning’, 11th International Scientific Conference on Mechanical
Engineering, Slovak University of Technology, Bratislava, Slovakia, 29-30
November 2007, p. 10.
Ä43.
N. Kontolatis and G.C. Vosniakos, ‘On planning brake-press bending
operations with Genetic Algorithms’, Proceedings of the 17th Flexible Automation
and Intelligent Manufacturing Conference (FAIM 2007), Philadelphia, USA, June
2007, pp. 875-882.
Ä42.
G.-C. Vosniakos and V. Millas, ‘Flowshop
scheduling using genetic algorithms’, Proceedings of the 17th DAAAM Symposium :
Intelligent Manufacturing & Automation: Focus on Mechatronics and Robotics,
8-11th November 2006, Vienna, Austria, pp. 437-438.
Ä41.
G.-C. Vosniakos and E. Matsas, ‘Feasibility
issues in robotic milling’, Proceedings of the 17th DAAAM Symposium :
Intelligent Manufacturing & Automation: Focus on Mechatronics and Robotics,
8-11th November 2006, Vienna, Austria, pp.435-436.
Ä40.
X. Gogouvitis and G.-C. Vosniakos, ‘On virtual
reality modeling of automated manufacturing systems’, Proceedings of the 17th
DAAAM Symposium : Intelligent Manufacturing & Automation: Focus on Mechatronics
and Robotics, 8-11th November 2006, Vienna, Austria, pp. 135-136.
Ä39.
A. Papantoniou, G.-C. Vosniakos and X. Gogouvitis, ‘On holistic product
development: anemometer / wind vane study’,
Proceedings of the 12th
International Conference on Machine Design and Production, Kuşadasi, Turkey, 5-8
September 2006, pp. 959-971.
Ä38. G.-C. Vosniakos and
G. Dimitrakopoulos, Manufacturing System scheduling using project management
techniques, Proceedings of the 12th International Conference on
Machine Design and Production, Kuşadasi, Turkey, 5-8 September 2006, 409-421.
Ä37. A. Avgikou, G.
Vosniakos and P. Benardos, SPC
pattern recognition using LVQ neural nets, Proceedings of the 16th Flexible
Automation and Intelligent Manufacturing Conference (FAIM 2006), Limerick,
Ireland, 26-28 June 2006, pp. 301-308.
Ä36. G. Folias and G.-C.
Vosniakos, On path planning for robotic polishing of sculptured surfaces,
Proceedings of the 16th Flexible Automation and Intelligent Manufacturing
Conference (FAIM 2006), Limerick, Ireland, 26-28 June 2006, pp. 53-60.
Ä35. A.
Krimpenis,
P.I.K.
Liakopoulos, K.C.
Giannakoglou
and
G.-C.
Vosniakos,
Multi-objective
design of optimal sculptured surface rough machining through Pareto and Nash
techniques, in : R. Schilling,
W.Haase, J. Periaux, H. Baier, G. Bugeda (Eds), CD-Proceedings EUROGEN 2005,
Evolutionary and Deterministic Methods for Design, Optimization and Control with
Applications to Industrial and Societal Problems, Munich, September 2005.
Ä34. N. K. Karagiannis,
N. D. Pagratis, D. I. Pantelis and G. C. Vosniakos
: Optimisation of flask initial temperature and alloy melt temperature in
investment casting, Proc. 2nd International Conference on
Manufacturing Engineering (ICMEN), Kassandra, Halkidiki, 5-7 October 2005, pp.
273-282.
Ä33. S. Foroulis, M.
Wiese, T. Tries, P. Benardos, J.-C. Aurich and G.-C Vosniakos : Burr formation
modelling with artificial neural networks, Proc. 2nd International
Conference on Manufacturing Engineering (ICMEN), Kassandra, Halkidiki, 5-7
October 2005, pp. 73-81.
Ä32. V. Millas and G.-C.
Vosniakos, Manufacturing System Scheduling using Genetic Algorithms and
Heuristics, CD Proceedings 18th International Conference on Production Research
(ICPR 2005), Fisciano, Italy, 1-4 August 2005,.paper ID: 0691.
Ä31.
G.-C.
Vosniakos and I. Tsakiris,
Practical decision tools for parallel batch scheduling of finish-machined
pressure die castings, Proceedings
of the 15th Flexible Automation and Intelligent Manufacturing Conference (FAIM
2005), Bilbao, Spain, 18-20 July 2005, pp. 358-366.
Ä30.
Á.
Krimpenis and G.-C. Vosniakos, Initialisation improvement in engineering
feedforward ANN models,
Proceedings of the
European Symposium on Artificial Neural Networks (ESANN'2005), Brugges, Belgium,
April 2005,
pp.169-174.
Ä29.
Á.
Krimpenis and G.-C. Vosniakos : Optimisation
of roughing strategy for sculptured surface machining using genetic algorithms
and neural networks, CD Proceedings 8th International Conference on Production
Engineering, Design and Control, Alexandria, Egypt, 27 - 29 December 2004, paper
ID: MCH-05.
Ä28. V. Lipari and G.-C.
Vosniakos, Issues in Feature-based design of free-form surface parts, CD
Proceedings 8th International Conference on Production Engineering, Design and
Control, Alexandria, Egypt, 27 - 29 December 2004 paper ID: MTR-07.
Ä27. G.-C. Vosniakos and
T. Psyhis : Performance measures for small flow-shops, Proceedings 4th
International Congress Mechanical Engineering Technologies 2004 (MET'04), Vol.
IV : Industrial Management. Training, Varna, Bulgaria, 25-27 September 2004, pp.
105-108.
Ä26.
G.-C. Vosniakos and D.
Tsompanidis : On coding and grouping of machined parts for different retrieval
purposes, Proceedings 4th International Congress Mechanical Engineering
Technologies 2004 (MET'04), Vol. V : Automation and Application of Information
Technologies, Varna, Bulgaria, 25-27 September 2004, pp. 182-185.
Ä25.
G.-C. Vosniakos, A.
Daskalopoulos and N. Straggas, A web-based integrated cutting tool management
system, Proc. 7th biennial Conference on Engineering Systems Design
and Analysis (ESDA2004), July 19-22, 2004, Manchester, United Kingdom, paper ID:
58421.
Ä24. T. Giannakakis and
G.-C. Vosniakos, Feature-based concurrent product-process design for white
appliance panels,
Proc. 5th Tools and Methods
for Competitive Engineering 2004 (TMCE 2004), April 13-17, 2004,
Lausanne, Switzerland, pp. 869-878.
Ä23.
G.-C. Vosniakos and A.
Koukouvitaki, On VRML simulation models of robotic manufacturing cells,
CD
Proceedings
5th Tools and Methods for
Competitive Engineering 2004 (TMCE 2004), April 13-17, 2004, Lausanne,
Switzerland, 11 p.
Ä22.
G.-C. Vosniakos and X.
Gogouvitis, Controller modeling for a flexible robotic hot forging cell, in
Current Advances in Mechanical Design and Production VIII, Proc. 8th
Cairo University International Conference on Mechanical Design and Production,
Cairo, Egypt, 2-6 January 2004, pp. 437-444.
Ä21.
K. Moumoulidou,
T. Giannakakis, G.-C. Vosniakos and P. Theoharidis, An advisory knowledge-based
system for the design of pressure die-casting gating systems, Proc.
International Conference on Virtual Engineering Applications for Design and
Product Development, 4-5 September 2003, Dublin, Ireland, pp. 125-134.
Ä20.
T. Giannakakis, S. Mylhäuser
and G.-C. Vosniakos,
Intelligent systems for evaluation of gravity casting quality,
Proc. International
Conference on Virtual Engineering Applications for Design and Product
Development, 4-5 September 2003, Dublin, Ireland, pp. 216-225.
Ä19.
G.-C. Vosniakos, A.
Krimpenis, P. Zampakos, D. Pantelis, C. Provatidis, B. Lekou and K.Karouzos,
On agile manufacturing of custom hip stems, Proc. 18th
International Computer Aided Production Engineering (CAPE) Conference, 18-19
March 2003, Edinburgh, Scotland, pp.469-478.
Ä18. S. Alexandrakis, P.
Benardos, G.-C. Vosniakos and N. Tsouvalis, Artificial Neural Network models for
quality control of CNC machined glass fibre reinforced composites’, XIV workshop
on supervising and diagnostics of machining systems, 10-12 March 2003, Karpacz,
Poland, proceedings published in : Machine
Engineering, Vol. 3, No 1-2, 200, pp. 139-149.
Ä17. G.-C. Vosniakos and
A. Pelekou : A concurrent engineering implementation for safety door
manufacturing, Proc. 1st
International Conference on Manufacturing Engineering (ICMEN), Halkidiki,
October 2002, pp. 443-453.
Ä16. G.-C. Vosniakos and
M. Papadakis :
Investigation of the integration possibilities of parametric CNC programming,
Proc. 1st International Conference on Manufacturing Engineering
(ICMEN), Halkidiki, October 2002, pp. 433-443.
Ä15.
S. Teleionis, G. Vosniakos
and T. Giannakakis : an expert system aid for technological decisions in sheet
metal forming operations, Proc. Flexible Automation and Intelligent
Manufacturing Conference FAIM02, Dresden, July 2002, pp. 483-493.
Reprinted as SME Technical Paper MF02-272.
Ä14.
G. Vosniakos and P. Katsiris
: an interactive multimedia training system for CNC machining, Proc. Flexible
Automation and Intelligent Manufacturing Conference FAIM02, Dresden, July 2002,
pp. 676-686.
Ä13. P. Benardos, G.
Vosniakos and G. Bozonas : face milling parameter selection based on Neural
Network modeling of technical literature data, Proceedings ASME First National
Conference on recent Advances in Mechanical Engineering, September 17-20, 2001,
Patras, paper ANG1/P-168.
Ä12. G. Vosniakos, D.
Manolakos, T. Giannakakis and P. Kostazos : Manufacturing intelligence computing
concepts in planning sheet metal forming operations, Proceedings ASME First
National Conference on recent Advances in Mechanical Engineering, September
17-20, 2001, Patras, paper ANGP165.
Ä11. T. Giannakakis and
G. Vosniakos : Flexible reverse engineering of 2-1/2 D mechanical parts on
machining centers, Proc. Flexible Automation and Intelligent Manufacturing
Conference FAIM01, Dublin, July 2001, pp. 197-206.
Ä10.
T. Giannakakis and G.
Vosniakos : Design for manufacture of press formed sheet metal parts,
Proceedings Shemet 2001, Leuven, April 2001, pp. 379-386.
Ä09.
A.G. Mamalis and G.C.
Vosniakos, Intelligence in
computer-aided process planning for machining, Proceedings 3rd
European Robotics, Intelligent Systems and Control Conference (EURISCON- June
1998) , Tzafestas, S. G., Ed., Springer Verlag, London, pp. 13-24.
Ä08. J. Wang, R. G.
Hannam, A. K. Kochhar and G. Vosniakos, A knowledge-based database approach for
statistical quality control for part manufacturing, Proceedings of the 1996
Chinese Automation Conference in the UK (CACUK'96), Oxford, 21–22 September,
1996,
pp. 99–104.
Ä07. G. Vosniakos and M.
Williams, On Reference Modelling of Integrated Manufacturing Systems Using OOA,
Proceedings 2nd International Conference on the Design of Information
Infrastructure Systems for Manufacturing (DIISM 96), IFIP Transactions B:
Computer Applications in Technology, Vol. B-15, 1996, pp 47-59.
Ä06. H. Denzel
and G.C. Vosniakos, A
feature-based design system and its
potential to unify CAD and CAM, Proceedings Workshop on Interfaces of Industrial
Systems for Production and Engineering, Darmstadt, 15-17 March 1993, IFIP
Transactions B: Computer Applications in Technology, Vol B-10, 1993, pp 131-144.
Ä05. B.J. Davies, M.W.
Park, G.C. Vosniakos, Automatic Feature Extraction in wire-frame models of
2-1/2-D prismatic parts, Proceedings of the 28th Machine Tool Design and
Research Conference, Manchester, April 1990, pp. 63-89.
Ä04. B.J. Davies, A.
Joseph, M. Kalta , X. Tang, M.W. Park and G.C. Vosniakos,
Expert systems to generate NC Data from CAD Product Models for
lathes,milling machines and coordinate inspection machines, Proceedings of the
Industrial Automation '90 Conference (IA ‘90), Singapore, 23-25 May
1990.
Ä03. A.G. Mamalis, G.C.
Vosniakos , N. Vaxevanidis, On
the surface integrity of mechanically and thermally worked metal plates,
Proceedings 2nd International. Conference on Technology of Plasticity,
Stuttgart, August 1987, pp 407-414.
Ä02. A.G. Mamalis, L.
Hatzikonstantis, A. Zavaliangos, G.C. Vosniakos and D. Manolakos, Evaluation of
the m-yield criterion of anisotropic sheet metal in predicting
limit strains, Proc. 3rd International Conference in CAD/CAM and FEM in
Metal Working, Stafford, U.K., April 1987; "CAD/CAM and FEM in Metal Working",
Eds. S.K. Ghosh and A. Niku-Lari, Pergamon Press, 1988, pp. 121-141.
Ä01. A.G. Mamalis, G.C.
Vosniakos, S. Diplaris, On the ball-drop forming of metals, Proceedings 13th
NAMRC, University of California - Berkeley, May 1985, pp. 198-203.