Publications in fully refereed
Conferences |
D104. A. Dimitrokalli, G.-C. Vosniakos, P. Benardos, E. Matsas, Industry 4.0 Support of Remanufacturing Operations. In Proceedings of VII International Workshop on Autonomous Remanufacturing: Advances in Remanufacturing, October 2023, eds. M. Fera, M. Caterino, R. Macchiaroli, D.-T. Pham, pp. 365-376, Cham: Springer Nature Switzerland, doi: 10.1007/978-3-031-52649-7_29.
D103. V. Iliopoulou, G.-C. Vosniakos, Injection molding control parameter assessment by nested Taguchi design of simulation experiments: a case study, International ESAFORM Conference 2024, 24-26 April 2024, Toulouse, France, Materials Research Proceedings, Vol. 41, 2023, pp. 2757-2766 doi: 10.21741/9781644903131-302.
D102. P. Spanidis, G.-C. Vosniakos, Redesgin of
metal parts for Additive Manufacturing: a review of case studies, 32nd
International Conference of Manufacturing Systems (ICMaS) 2023
(ICMaS2023), 16 November 2023, Bucharest, Romania, Proceedings in Manufacturing
Systems, Vol. 18, No 1, pp 17-24.
D101. G.-C. Vosniakos, E. Stathas, Exploring
collboration of humans with industrial robots using ROS based simulation, 32nd
International Conference of Manufacturing Systems (ICMaS) 2023
(ICMaS2023), 16 November 2023, Bucharest, Romania, Proceedings in Manufacturing
Systems, Vol. 18, No 1, pp 33-38.
D100. A. Ioannidis, M. Boufali, G.-C. Vosniakos,
T. Anagnostakis, Development of a low-cost extrusion-based 3D printer for high
performance engineering polymers, 10th Manufacturing Engineering Society
International Conference 2023 (MESIC2023), 28-30 June 2023, Sevilla, Spain, Key
Egineering Materials, Vol. 960, pp. 37-45, doi: 10.4028/p-qO8OUM,
D99. A.
Vasileiou, G.-C. Vosniakos, D. Pantelis, Determination of heat transfer
coefficient in casting: a comparison of analytical, inverse and trial-and-error
methods, 10th Manufacturing Engineering Society International Conference 2023
(MESIC2023), 28-30 June 2023, Sevilla, Spain, Key Egineering Materials, Vol.
955,pp. 15-22, doi: 10.4028/p-tuDiG1.
D98. A. Iliopoulos, G.-C. Vosniakos,
Optimisation of CNC machining part programs exemplified for rough-milling of
pockets, 32nd International Conference on Flexible Automation and Intelligent
Manufacturing, 18-23 June 2023, Porto, Portugal, Lecture Notes in Mechanical
Engineering, pp. 257-264, doi: 10.1007/978-3-031-38241-3_29.
D97. N.
Manou, G.-C. Vosniakos, P. Kostazos, 3D Printing of Polycaprolactone Scaffolds
with Heterogenous Pore Size for Living Tissue Regeneration, 32nd International
Conference on Flexible Automation and Intelligent Manufacturing, 18-23 June
2023, Porto, Portugal, Lecture Notes in Mechanical Engineering, pp. 345-353,
doi: 10.1007/978-3-031-38241-3_39.
D96. C. Angelidou, E. Stathatos,
G.-C. Vosniakos, On Reinforcement Learning for Part Dispatching in UAV-served
Flexible Manufacturing Systems, 32nd International Conference on Flexible
Automation and Intelligent Manufacturing, 18-23 June 2023, Porto, Portugal,
Lecture Notes in Mechanical Engineering, pp. 486-494, doi:
10.1007/978-3-031-38165-2_57.
D95. P. Savvakis, G.-C. Vosniakos,
E. Stathatos, A. Debar, M. Chodnicki, P. Benardos, UWB-based Indoor Navigation
in a Flexible Manufacturing System using a Custom Quadrotor UAV, 32nd
International Conference on Flexible Automation and Intelligent Manufacturing,
18-23 June 2023, Porto, Portugal, Lecture Notes in Mechanical Engineering, pp.
91-98, doi: 10.1007/978-3-031-38241-3_11.
D94. G. Papazetis, E. Tzimas, P.
Benardos, G.-C. Vosniakos, Development of a Robot-based Handling System for a
High Precision Manufacturing Cell, 32nd International Conference on Flexible
Automation and Intelligent Manufacturing, 18-23 June 2023, Porto, Portugal,
Lecture Notes in Mechanical Engineering, pp. 29-36, doi:
10.1007/978-3-031-38241-3_4.
D92 D.K. Rissaki, A.N. Vasileiou, M.C. Smith, O. Muransky, P.G. Benardos, G.-C. Vosniakos, Establishing an automated heatsource calibration framework, Mathematical modelling of weld phenomena: Proc. 13th International Seminar Numerical Analysis of Weldability, Eds C. Sommitsch, N. Enzinger, P. Mayr, 4-7/9 2022, Graz - Schloss Seggau – Austria, doi: 0.3217/978-3-85125-968-1-12.
D91.
A. Vasileiou, G.-C. Vosniakos, D.I. Pantelis, , Investigating the
suitability of using a single heat transfer coefficient in metal casting
simulation: An inverse approach, Proc. International ESAFORM Conference 2023,
19-21 April 2023, Kraków, Poland, Materials Research Proceedings, Vol. 28, 2023,
pp. 1175-1182 doi: 10.21741/9781644902479-128.
D90.
G.-C. Vosniakos, P.J. Dimakopoulos, A. Vasileiou, An Inverse method for
determining fabric permeability in vacuum assisted resin infusion for composite
parts forming, Proc. International ESAFORM Conference 2023, 19-21 April 2023,
Kraków, Poland, Materials Research Proceedings, Vol. 28, 2023, pp. 407-416, DOI:
10.21741/9781644902479-45.
D89.
G. Sotirchos, G.-C. Vosniakos, Development of a programmable work-holding
fixture for laser welding of solar absorber sheets, 31st International
Conference of Manufacturing Systems (ICMaS)
2022 (ICMaS2022), 10 November 2022, Bucharest, Romania, Proceedings in
Manufacturing Systems, Vol. 17, No 1, pp 9-16.
D88.
G.-C. Vosniakos, I. Pieratos, T. Mitropoulos, P. Avrampos, Preliminary
investigation on undamped open loop control of a polishing jig fro machining
centres, 31st International Conference of Manufacturing Systems (ICMaS)
2022 (ICMaS2022), 10 November 2022, Bucharest, Romania, Proceedings in
Manufacturing Systems, Vol. 17, No 1, pp 3-8.
D87.
G.-C. Vosniakos, X.V. Gogouvitis, E. Panos, Preliminary manufacturing
cell design in digital factory, 31st International Conference on Flexible
Automation and Intelligent Manufacturing (FAIM2022), Detroit, USA, 19-23 June
2022, Lecture Notes in Mechanical Engineering, pp. 466-474. doi:
10.1007/978-3-031-17629-6_48.
D86.
G.-C. Vosniakos, E. Manou, Quality control of die castings by machine
vision: a case study exploiting classic and machine learning techniques, 31st
International Conference on Flexible Automation and Intelligent Manufacturing
(FAIM2022), Detroit, USA, 19-23 June 2022, Lecture Notes in Mechanical
Engineering, pp. 622-629, doi: 10.1007/978-3-031-17629-6_65.
D85.
G.-C. Vosniakos, E. Lekai, G. Maltezos, On the mechanical design of a
customized Unmanned Aerial Vehicle transporter for Flexible Manufacturing
Systems, Proc. 10th IFAC Conference on Manufacturing Modelling, Management and
Control (MIM2022), June 22-24, 2022. Nantes, France, pp. 988-993. doi: doi:
10.1016/j.ifacol.2022.09.485.
D84.
G.-C. Vosniakos, G. Maltezos, A feasibility study on Unmanned Aerial
Vehicle navigation and docking for materials transportation in manufacturing
systems, Proc. 10th IFAC Conference on Manufacturing Modelling, Management and
Control (MIM2022), June 22-24, 2022. Nantes, France, pp. 969-974. doi:
10.1016/j.ifacol.2022.09.477.
D83.
Z. Papagianni, G.-C. Vosniakos, Surface defects
detection on pressure die castings by machine learning based on machine vision,
5th International Conference on Design, Simulation, Manufacturing: The
Innovation Exchange, DSMIE-2022, June 7-10, 2022, Poznan, Poland –
Lecture Notes in Mechanical Engineering,
Volume 1: Design, Simulation, Manufacturing: The Innovation Exchange, pp. 51-61,
Springer, Cham, doi: 10.1007/978-3-031-06025-0_6.
D82.
G. Vasilopoulos, G.-C. Vosniakos, Preliminary design of assembly system
and operations for large mechanical products using a game engine, 54th CIRP CMS
2021 - Towards Digitalized Manufacturing 4.0 (D. Mourtzis, ed.), Procedia CIRP,
Vol. 104, 2021, pp. 1395-1400, doi: 10.1016/j.procir.2021.11.235.
D81.
E. Stathatos, G.-C. Vosniakos, Comparison of nominal and real 2D contours
of manufactured products using Ant Colony Optimisation of shape landmarks,
30th International Conference on Flexible Automation and
Intelligent Manufacturing (FAIM2021), Athens, Greece, 15-18 June 2021, Procedia
Manufacturing, Vol. 55 (2021), pp. 154-159 (gold open access), DOI:
10.1016/j.promfg.2021.10.022.
D80.
I. Sideris, G.-C. Vosniakos, A simulation study of local powder bed gas
shielding in Selective Laser Sintering / Melting machines, 30th International
Conference on Flexible Automation and Intelligent Manufacturing (FAIM2021),
Athens, Greece, 15-18 June 2021, Procedia Manufacturing, Vol. 55 (2021), pp.
88–95 (gold open access), DOI: 10.1016/j.promfg.2021.10.013.
D79.
D. Vlagkoulis, A. Vasileiou, G.-C. Vosniakos, A study on casting of
structural mesh-like metal parts, IManEE 2020 Conference, IOP Conf. Series:
Materials Science and Engineering 1037 (2021) 012017,
DOI:10.1088/1757-899X/1037/1/012017.
D78.
M. Deja, M.S. Siemiątkowski, G.-C. Vosniakos, G. Maltezos, Opportunities
and challenges for exploiting drones in agile manufacturing systems, 30th
International Conference on Flexible Automation and Intelligent Manufacturing
(FAIM2021), Athens, Greece, 15-18 June 2021, Procedia Manufacturing, Vol. 51
(2020), pp. 527–534 (gold open access) DOI: 10.1016/j.promfg.2020.10.074.
D77.
P. Avrampos, G.-C. Vosniakos, Á prototype powder deposition system for an
open Selective Laser Sintering machine, 30th International Conference on
Flexible Automation and Intelligent Manufacturing (FAIM2021), Athens, Greece,
15-18 June 2021, Procedia Manufacturing, Vol. 51 (2020), pp. 755–762 (gold open
access) DOI: 10.1016/j.promfg.2020.10.106.
D76.
S. Pasalopoulos, P. Avrampos, G.-C. Vosniakos, Surface quality evaluation
of non-sintered powder layers in Selective Laser Sintering by 3D scanning, 30th
International Conference on Flexible Automation and Intelligent Manufacturing
(FAIM2021), Athens, Greece, 15-18 June 2021, Procedia Manufacturing, Vol. 51
(2020), pp. 748–754 (gold open access) DOI: 10.1016/j.promfg.2020.10.105.
D75.
A. Dimitrokalli, G-C. Vosniakos, D. Nathanael and E. Matsas 'On the
assessment of human-robot collaboration in mechanical product assembly by use of
Virtual Reality' 30th International Conference on Flexible Automation and
Intelligent Manufacturing (FAIM2021), Athens, Greece, 15-18 June 2021, Procedia
Manufacturing, Vol. 51 (2020), pp. 627–634 (gold open access) DOI:
10.1016/j.promfg.2020.10.088.
D74.
P. Filippidis, G. Vosniakos and G. Papazetis, Process parameter
investigation for 3D printing of cellular structured parts, 30th International
Conference on Flexible Automation and Intelligent Manufacturing (FAIM2021), June
15-18, 2021, Athens, Greece, in Procedia Manufacturing, Vol. 51, 2020, pp.
717–724 (gold open access) DOI: 10.1016/j.promfg.2020.10.101.
D73.
N. Lambos, G. Vosniakos and G. Papazetis, Low-cost automatic
identification of nozzle clogging in material extrusion 3D printers, 30th
International Conference on Flexible Automation and Intelligent Manufacturing
(FAIM2021), June 15-18, 2021, Athens, Greece, Procedia Manufacturing, Vol. 51,
2020, pp. 274–279, DOI: 10.1016/j.promfg.2020.10.039.
D72.
G. -C. Vosniakos, A. Parousi, G. Leivadiotakis, L. Blein, C. Lassime ,
Task-oriented off-line programming of an industrial robot serving CNC lathes,
28th International Conference of Manufacturing Systems (ICMaS)
2019 (ICMaS2019), 14-15 November 2019, Bucharest, Romania, Proceedings in
Manufacturing Systems, Vol. 14, No 1, pp 9-14.
D71.
G-C. Vosniakos, L. Ouillon, E. Matsas,
Exploration of two safety strategies in human-robot collaborative
manufacturing using Virtual Reality, 29th International Conference on Flexible
Automation and Intelligent Manufacturing (FAIM2019), June 24-28, 2019, Limerick,
Ireland, Procedia Manufacturing, Vol. 38, 2019, pp 524-531, DOI:
10.1016/j.promfg.2020.01.066.
D70.
C. Maragkos, G.-C. Vosniakos, E. Matsas,
Virtual reality assisted robot programming for human collaboration, 29th
International Conference on Flexible Automation and Intelligent Manufacturing
(FAIM2019), June 24-28, 2019, Limerick, Ireland, Procedia Manufacturing, Vol.
38, 2019, pp. 1697-1704, DOI: 10.1016/j.promfg.2020.01.109
D69.
C. Drakos and G.-C. Vosniakos, Manufacturing performance improvement of
complex products based on coding and parametrisation: a case study,
International Conference on Manufacturing Systems 2018 (ICMaS2017), 15-16
November 2017, Bucharest, Romania, Proceedings in Manufacturing Systems, Vol.
13, No 1, pp 27-32.
D68.
A. Dine and G.-C. Vosniakos, On the development of a robot-operated
3D-printer, 28th International Conference on Flexible Automation and Intelligent
Manufacturing, FAIM2018, 11-14 June 2018, Columbus, Ohio, USA, Proceedia
Manufacturing, Vol. 17, 2018, pp. 6-13, DOI: 10.1016/j.promfg.2018.10.004.
D67.
I. Koustas, T. Papingiotis, G.-C. Vosniakos, A. Dine, On the development
of a filament winding robotic system, 28th International Conference on Flexible
Automation and Intelligent Manufacturing, FAIM2018, 11-14 June 2018, Columbus,
Ohio, USA, Proceedia Manufacturing, Vol. 17, 2018, pp. 6-13, DOI:
10.1016/j.promfg.2018.10.145.
D66.
E. Nikolidakis and G.-C. Vosniakos, A novel tool clamping system for CNC
press brakes, International Conference on Manufacturing Systems 2017
(ICMaS2017), 9-10 November 2017, Bucharest, Romania,
published in: Proceedings in Manufacturing Systems, Vol. 12, No 2, pp
59-64.
D65.
G.-C. Vosniakos, J. Deville, E. Matsas, On immersive Virtual Environments
for assessing human-driven assembly of large mechanical parts, 27th
International Conference on Flexible Automation and Intelligent Manufacturing,
FAIM2017, 27-30 June 2017, Modena, Italy, Proceedia Manufacturing, Vol. 11,
2017, pp. 1263-1270, DOI: 10.1016/j.promfg.2017.07.253.
D64.
A.N. Vasileiou, G.-C. Vosniakos , D.I. Pantelis, On the feasibility of
determining the Heat Transfer Coefficient in casting simulations by Genetic
Algorithms, 27th International Conference on Flexible Automation and Intelligent
Manufacturing, FAIM2017, 27-30 June 2017, Modena, Italy, Proceedia
Manufacturing, Vol. 11, 2017, pp. 509–516, DOI: 10.1016/j.promfg.2017.07.144.
D63.
E. Stathatos, G.-C. Vosniakos and D. Pantelis, Prediction of Crater Size
in Drilling and Texturing by Pulsed Laser Ablation, 9th International Congress
on Precision Machining, 6-9
September 2017, Athens, Greece, Solid State Phenomena, vol. 261, pp. 129-134,
DOI: 10.4028/www.scientific.net/SSP.261.129.
D62.
P. G. Benardos and G.-C. Vosniakos, Internet of Things and industrial
applications for precision machining, 9th International Congress on Precision
Machining, 6-9 September 2017,
Athens, Greece, Solid State Phenomena, vol. 261, pp. 440-447, DOI:
10.4028/www.scientific.net/SSP.261.440.
D61.
T. Mitropoulos, P. Avrampos and G.-C. Vosniakos, Development of a
Polishing Jig for Machining Centres, 9th International Congress on Precision
Machining, 6-9 September 2017,
Athens, Greece, Solid State Phenomena, vol. 261, pp. 167-172, DOI:
10.4028/www.scientific.net/SSP.261.167.
D60.
E.
Matsas, G. Vosniakos and D. Batras, Modelling Simple Human-Robot Collaborative
Manufacturing Tasks in Interactive Virtual Environments, 18th VRIC Laval Virtual
2016, 23-27 March 2016, ACM Digital Library, Article No 20, p. 4, DOI:
10.1145/2927929.2927948.
D59.
I. Kyriopoulou, G.-C. Vosniakos , D. I. Pantelis and P. G. Benardos,
Process parameter selection using Neural Networks for laser milling of wood,
Proceedings of FAIM2015 Conference, 23-26 June 2015, Wolverhampton, Britain, pp.
90-97.
D58.
P.P. Psyllaki, D.I. Pantelis and G.-C. Vosniakos, Nd:YAG laser surface
micro-modification of tool steels, Proceedings 5th International Conference on
Manufacturing Engineering (ICMEN), Halkidiki, 1-3 October 2014, pp. 343-350.
D57.
E. Matsas, D. Batras and G.-C. Vosniakos, Beware of the robot: a highly
interactive and immersive Virtual Reality training application in robotic
manufacturing systems, International Conference on Advances in Production
Management Systems (APMS) 2012, 24-26 September 2012, Rhodes, Greece, pp.
606-613.
D56.
G.-C. Vosniakos, M. Karyotis, Structural improvement of hydraulic
shearing machine, Proceedings of the 22nd International DAAAM Symposium, 23-26
November 2011, Vienna, Austria, pp. 443-444.
D55.
G.-C. Vosniakos, A. Vassiliou and S. Tsekouras, Numerical Simulation of
sand casting of an aluminium part, Proceedings of the 22nd International DAAAM
Symposium, 23-26 November 2011, Vienna, Austria, pp. 445-446.
D54.
D. Nathanael, G.-C. Vosniakos and S. Mosialos, Cognitive task analysis
for Virtual Reality Training: the case of CNC tool offsetting, Proceedings of
ECCE 2010 Conference, 25-27 August 2010, Delft, The Netherlands, pp. 241-244.
D53.
N. Kontolatis, G.-C. Vosniakos and K. Kyriakopoulos, On parametric
toolpath design of a robot serving a press-brake, Proceedings of FAIM2009
Conference, 6-8 July, Middlesbrough, Britain, pp. 139-146.
D52.
A. Gatsou, X. Gogouvitis, G.-C. Vosniakos, C. Wagenknecht and J.-C.
Aurich, Discrete event simulation for manufacturing system analysis: an
industrial case study, Proceedings of FAIM2009 Conference, 6-8 July 2009,
Middlesbrough, Britain, p. 1309-1316
D51.
X.V. Gogouvitis and G.-C. Vosniakos, Virtual reality modelling of
manufacturing systems based on ontologies, Proceedings of DET2008, 5th
International Conference on Digital Enterprise Technology, 22-24 October 2008,
Nantes, France, pp. 13.
D50.
G.-C. Vosniakos, X. Gogouvitis, B. Fidler and S. Valcuha, Preliminary
technical design methodology of manufacturing systems, Proceedings 19th
International DAAAM symposium "Intelligent Manufacturing & Automation: Focus on
Next Generation of Intelligent Systems and Solutions", Trnava, Slovakia, 22-25th
October 2008, pp. 754755.
D49.
A.N. Vassiliou, D.I. Pantelis and G.-C. Vosniakos, Investigation of
centrifugal casting conditions influence on part quality, Proceedings 3rd
International Conference on Manufacturing Engineering (ICMEN), Halkidiki, 1-3
October 2008, pp. 347-356.
D48.
T. Giannakakis, G.-C.Vosniakos and D. Pantelis, Integrating design and
production of precision traditional ceramics, Proceedings 3rd International
Conference on Manufacturing Engineering (ICMEN), Halkidiki, 1-3 October 2008,
pp. 747-756.
D47.
X.V. Gogouvitis and G.-C. Vosniakos, Virtual Reality modelling concepts
of automated manufacturing systems, Proceedings FAIM 2008 Conference , 30 June-2
July 2008, Skővde, Sweden, pp. 955-962.
D46.
G.-C. Vosniakos , T. Giannakakis, X. Gogouvitis and A. Papantoniou,
Simulation-based linked design and manufacturing decisions in PLM : a case
study, Proceedings FAIM 2008 Conference, 30 June-2 July 2008, Skővde, Sweden,
pp. 171-178.
D45.
B. Fidler, Š. Valčuha, G.-C. Vosniakos and X.V. Gogouvitis, Konfigurácia
virtuálneho podniku s využitím skupinovej technológie (Virtual Enterprises’
configuration using principles of Group Technology), 11th International
Scientific Conference on Mechanical Engineering, 29-30 November 2007, Slovak
University of Technology, Bratislava, Slovakia, p. 14.
D44.
G.-C. Vosniakos,
G.-M. Haziris and X. Gogouvitis, ‘A study on using ANNs in EDM process
planning’, 11th International Scientific Conference on Mechanical Engineering,
Slovak University of Technology, Bratislava, Slovakia, 29-30 November 2007, p.
10.
D43.
N.
Kontolatis and G.C. Vosniakos, ‘On planning brake-press bending operations with
Genetic Algorithms’, Proceedings of the 17th Flexible Automation and Intelligent
Manufacturing Conference (FAIM 2007), Philadelphia, USA, June 2007, pp. 875-882.
D42.
G.-C. Vosniakos and V. Millas, ‘Flowshop scheduling using genetic
algorithms’, Proceedings of the 17th DAAAM Symposium : Intelligent Manufacturing
& Automation: Focus on Mechatronics and Robotics, 8-11th November 2006, Vienna,
Austria, pp. 437-438.
D41.
G.-C. Vosniakos and E. Matsas, ‘Feasibility issues in robotic milling’,
Proceedings of the 17th DAAAM Symposium : Intelligent Manufacturing &
Automation: Focus on Mechatronics and Robotics, 8-11th November 2006, Vienna,
Austria, pp.435-436.
D40.
X. Gogouvitis and G.-C. Vosniakos, ‘On virtual reality modeling of
automated manufacturing systems’, Proceedings of the 17th DAAAM Symposium :
Intelligent Manufacturing & Automation: Focus on Mechatronics and Robotics,
8-11th November 2006, Vienna, Austria, pp. 135-136.
D39.
A. Papantoniou, G.-C. Vosniakos and X. Gogouvitis, ‘On holistic product
development: anemometer / wind vane study’, Proceedings of the 12th
International Conference on Machine Design and Production, Kuşadasi, Turkey, 5-8
September 2006, pp. 959-971.
D38.
G.-C. Vosniakos and G. Dimitrakopoulos, Manufacturing System scheduling
using project management techniques, Proceedings of the 12th
International Conference on Machine Design and Production, Kuşadasi, Turkey, 5-8
September 2006, 409-421.
D37.
A. Avgikou, G. Vosniakos and
P. Benardos, SPC pattern recognition using LVQ neural nets, Proceedings of the
16th Flexible Automation and Intelligent Manufacturing Conference (FAIM 2006),
Limerick, Ireland, 26-28 June 2006, pp. 301-308.
D36.
G. Folias and G.-C. Vosniakos, On path planning for robotic polishing of
sculptured surfaces, Proceedings of the 16th Flexible Automation and Intelligent
Manufacturing Conference (FAIM 2006), Limerick, Ireland, 26-28 June 2006, pp.
53-60.
D35.
A.
Krimpenis,
P.I.K.
Liakopoulos,
K.C.
Giannakoglou
and
G.-C.
Vosniakos,
Multi-objective
design of optimal sculptured surface rough machining through Pareto and Nash
techniques,
in : R. Schilling,
W.Haase, J. Periaux, H. Baier, G. Bugeda (Eds), CD-Proceedings EUROGEN 2005,
Evolutionary and Deterministic Methods for Design, Optimization and Control with
Applications to Industrial and Societal Problems, Munich, September 2005.
D34. N. K. Karagiannis,
N. D. Pagratis, D. I. Pantelis and G. C. Vosniakos
: Optimisation of flask initial temperature and alloy melt temperature in
investment casting, Proc. 2nd International Conference on
Manufacturing Engineering (ICMEN), Kassandra, Halkidiki, 5-7 October 2005, pp.
273-282.
D33.
S. Foroulis, M. Wiese, T. Tries, P. Benardos, J.-C. Aurich and G.-C
Vosniakos : Burr formation modelling with artificial neural networks, Proc. 2nd
International Conference on Manufacturing Engineering (ICMEN), Kassandra,
Halkidiki, 5-7 October 2005, pp. 73-81.
D32.
V. Millas and G.-C. Vosniakos, Manufacturing System Scheduling using
Genetic Algorithms and Heuristics, CD Proceedings 18th International Conference
on Production Research (ICPR 2005), Fisciano, Italy, 1-4 August 2005,.paper ID:
0691.
D31.
G.-C.
Vosniakos and I. Tsakiris,
Practical decision tools for parallel batch scheduling of finish-machined
pressure die castings,
Proceedings of the 15th Flexible Automation and Intelligent Manufacturing
Conference (FAIM 2005), Bilbao, Spain, 18-20 July 2005, pp. 358-366.
D30.
Á.
Krimpenis and G.-C. Vosniakos, Initialisation improvement in engineering
feedforward ANN models,
Proceedings of the European Symposium on Artificial Neural Networks
(ESANN'2005), Brugges, Belgium, April 2005,
pp.169-174.
D29.
Á.
Krimpenis and G.-C. Vosniakos : Optimisation of
roughing strategy for sculptured surface machining using genetic algorithms and
neural networks, CD Proceedings 8th International Conference on Production
Engineering, Design and Control, Alexandria, Egypt, 27 - 29 December 2004, paper
ID: MCH-05.
D28.
V. Lipari and G.-C. Vosniakos, Issues in Feature-based design of
free-form surface parts, CD Proceedings 8th International Conference on
Production Engineering, Design and Control, Alexandria, Egypt, 27 - 29 December
2004 paper ID: MTR-07.
D27.
G.-C. Vosniakos and T. Psyhis : Performance measures for small
flow-shops, Proceedings 4th International Congress Mechanical Engineering
Technologies 2004 (MET'04), Vol. IV : Industrial Management. Training, Varna,
Bulgaria, 25-27 September 2004, pp. 105-108.
D26.
G.-C.
Vosniakos and D. Tsompanidis : On coding and grouping of machined parts for
different retrieval purposes, Proceedings 4th International Congress Mechanical
Engineering Technologies 2004 (MET'04), Vol. V : Automation and Application of
Information Technologies, Varna, Bulgaria, 25-27 September 2004, pp. 182-185.
D25.
G.-C.
Vosniakos, A. Daskalopoulos and N. Straggas, A web-based integrated cutting tool
management system, Proc. 7th biennial Conference on Engineering
Systems Design and Analysis (ESDA2004), July 19-22, 2004, Manchester, United
Kingdom, paper ID: 58421.
D24. T. Giannakakis and
G.-C. Vosniakos, Feature-based concurrent product-process design for white
appliance panels,
Proc. 5th
Tools and Methods for Competitive
Engineering 2004 (TMCE 2004), April 13-17, 2004, Lausanne, Switzerland,
pp. 869-878.
D23.
G.-C.
Vosniakos and A. Koukouvitaki, On VRML simulation models of robotic
manufacturing cells,
CD
Proceedings
5th Tools and Methods for
Competitive Engineering 2004 (TMCE 2004), April 13-17, 2004, Lausanne,
Switzerland, 11 p.
D22.
G.-C.
Vosniakos and X. Gogouvitis, Controller modeling for a flexible robotic hot
forging cell, in Current Advances in Mechanical Design and Production VIII,
Proc. 8th Cairo University International Conference on Mechanical
Design and Production, Cairo, Egypt, 2-6 January 2004, pp. 437-444.
D21.
K.
Moumoulidou, T. Giannakakis, G.-C. Vosniakos and P. Theoharidis, An advisory
knowledge-based system for the design of pressure die-casting gating systems,
Proc. International Conference on Virtual Engineering Applications for Design
and Product Development, 4-5 September 2003, Dublin, Ireland, pp. 125-134.
D20.
T.
Giannakakis, S. Mylhäuser and G.-C. Vosniakos,
Intelligent systems for evaluation of gravity casting quality,
Proc. International Conference on Virtual Engineering Applications for Design
and Product Development, 4-5 September 2003, Dublin, Ireland, pp. 216-225.
D19.
G.-C.
Vosniakos, A. Krimpenis, P. Zampakos, D. Pantelis, C. Provatidis, B. Lekou and
K.Karouzos, On agile manufacturing of custom hip stems, Proc. 18th
International Computer Aided Production Engineering (CAPE) Conference, 18-19
March 2003, Edinburgh, Scotland, pp.469-478.
D18.
S. Alexandrakis, P. Benardos, G.-C. Vosniakos and N. Tsouvalis,
Artificial Neural Network models for quality control of CNC machined glass fibre
reinforced composites’, XIV workshop on supervising and diagnostics of machining
systems, 10-12 March 2003, Karpacz, Poland, proceedings published in :
Machine Engineering, Vol. 3, No 1-2, 200,
pp. 139-149.
D17. G.-C. Vosniakos and
A. Pelekou : A concurrent engineering implementation for safety door
manufacturing,
Proc. 1st
International Conference on Manufacturing Engineering (ICMEN), Halkidiki,
October 2002, pp. 443-453.
D16. G.-C. Vosniakos and
M. Papadakis
:
Investigation of the integration possibilities of parametric CNC programming,
Proc. 1st International Conference on Manufacturing Engineering
(ICMEN), Halkidiki, October 2002, pp. 433-443.
D15.
S.
Teleionis, G. Vosniakos and T. Giannakakis : an expert system aid for
technological decisions in sheet metal forming operations, Proc. Flexible
Automation and Intelligent Manufacturing Conference FAIM02, Dresden, July 2002,
pp. 483-493. Reprinted as SME
Technical Paper MF02-272.
D14.
G.
Vosniakos and P. Katsiris : an interactive multimedia training system for CNC
machining, Proc. Flexible Automation and Intelligent Manufacturing Conference
FAIM02, Dresden, July 2002, pp. 676-686.
D13.
P. Benardos, G. Vosniakos and G. Bozonas : face milling parameter
selection based on Neural Network modeling of technical literature data,
Proceedings ASME First National Conference on recent Advances in Mechanical
Engineering, September 17-20, 2001, Patras, paper ANG1/P-168.
D12.
G. Vosniakos, D. Manolakos, T. Giannakakis and P. Kostazos :
Manufacturing intelligence computing concepts in planning sheet metal forming
operations, Proceedings ASME First National Conference on recent Advances in
Mechanical Engineering, September 17-20, 2001, Patras, paper ANGP165.
D11.
T. Giannakakis and G. Vosniakos : Flexible reverse engineering of 2-1/2 D
mechanical parts on machining centers, Proc. Flexible Automation and Intelligent
Manufacturing Conference FAIM01, Dublin, July 2001, pp. 197-206.
D10.
T.
Giannakakis and G. Vosniakos : Design for manufacture of press formed sheet
metal parts, Proceedings Shemet 2001, Leuven, April 2001, pp. 379-386.
D09.
A.G.
Mamalis and G.C. Vosniakos,
Intelligence in
computer-aided process planning for machining, Proceedings 3rd
European Robotics, Intelligent Systems and Control Conference (EURISCON- June
1998) , Tzafestas, S. G., Ed., Springer Verlag, London, pp. 13-24.
D08.
J. Wang, R. G. Hannam, A. K. Kochhar and G. Vosniakos, A knowledge-based
database approach for statistical quality control for part manufacturing,
Proceedings of the 1996 Chinese Automation Conference in the UK (CACUK'96),
Oxford, 21–22 September, 1996,
pp. 99–104.
D07.
G. Vosniakos and M. Williams, On Reference Modelling of Integrated
Manufacturing Systems Using OOA, Proceedings 2nd International
Conference on the Design of Information Infrastructure Systems for Manufacturing
(DIISM 96), IFIP Transactions B: Computer Applications in Technology, Vol. B-15,
1996, pp 47-59.
D06.
H. Denzel and G.C. Vosniakos,
A feature-based design
system and its potential to unify CAD and
CAM, Proceedings Workshop on Interfaces of Industrial Systems for Production and
Engineering, Darmstadt, 15-17 March 1993, IFIP Transactions B: Computer
Applications in Technology, Vol B-10, 1993, pp 131-144.
D05.
B.J. Davies, M.W. Park, G.C. Vosniakos, Automatic Feature Extraction in
wire-frame models of 2-1/2-D prismatic parts, Proceedings of the 28th Machine
Tool Design and Research Conference, Manchester, April 1990, pp. 63-89.
D04.
B.J. Davies, A. Joseph, M. Kalta , X. Tang, M.W. Park and G.C. Vosniakos,
Expert systems to generate NC Data from CAD Product Models for
lathes,milling machines and coordinate inspection machines, Proceedings of the
Industrial Automation '90 Conference (IA ‘90), Singapore, 23-25 May
1990.
D03.
A.G. Mamalis, G.C. Vosniakos , N. Vaxevanidis,
On the surface integrity of mechanically and thermally worked metal
plates, Proceedings 2nd International. Conference on Technology of Plasticity,
Stuttgart, August 1987, pp 407-414.
D02.
A.G. Mamalis, L. Hatzikonstantis, A. Zavaliangos, G.C. Vosniakos and D.
Manolakos, Evaluation of the m-yield criterion of anisotropic sheet metal in
predicting limit strains, Proc. 3rd
International Conference in CAD/CAM and FEM in Metal Working, Stafford, U.K.,
April 1987; "CAD/CAM and FEM in Metal Working", Eds. S.K. Ghosh and A.
Niku-Lari, Pergamon Press, 1988, pp. 121-141.
D01.
A.G. Mamalis, G.C. Vosniakos, S. Diplaris, On the ball-drop forming of
metals, Proceedings 13th NAMRC, University of California - Berkeley, May 1985,
pp. 198-203.