Publications

 

  1. Tsakalakis K.G, Syrmakezis K.K., and Sammas I., 2016, Size Reduction and Recycling Processes in Waste management of Concrete Demolition Debris, presented in 17th Panhellenic Concrete Congress (Technical Chamber of Greece, TCM), 10-12 November 2016, Thessaloniki-Greece.
  2. Syrmakezis K.K., Tsakalakis K.G and Sammas I., 2016, Use of Conventional Mineral Processing Procedures and Equipment on Demolished Concrete Recycling - An Overview, presented at 5th International Conference on Industrial and Hazardous Waste Management “CRETE 2016”, 27-29 September 2016 in Chania-Crete, Greece.
  3. Tsakalakis K.G., Benardos A., Sammas I., 2016, Metals Recovery from Pulverized Printed Circuit Boards (PCBs) by Flotation, presented in 3rd Symposium on Urban Mining and Circular Economy-SUM 2016, 23-25 May 2016, Bergamo, Italy.
  4. Larring Y., Pishahang M., Sunding M.F. and Tsakalakis K., (2015), Fe-Mn based minerals with remarkable redox characteristics for Chemical Looping Combustion, Fuel, http://www.sciencedirect.com/science/article/pii/S0016236115006638.
  5. Tsakalakis K.G. and Michalakopoulos Th., 2015, Mathematical modeling of the Conveyor Belt capacity, The 8th International Conference for Conveying and Handling of Particulate Solids, Tel-Aviv, Israel, 4-7 May 2015.
  6. Menegaki, M., Benardos, A., Kaliampakos, D., Tsakalakis, K., 2015. “Is Landfill Mining a New Prospect for the Mining Sector?” Proc. 24th Int. Mining Congress and Exhibition of Turkey-IMCET'15 Antalya, Turkey, April 14-17, 2015, pp. 101-111.
  7. Tsakalakis K.G., 2014, Mineral processing methods used to recover valuable content from MSWs, “Reclaim - Landfill mining pilot application for recovery of invaluable metals, materials, land and energy”, 1st National Landfill Mining Conference, September 16, 2014, The “Met Hotel”, Thessaloniki, Greece (in Greek).
  8. Tsakalakis K.G., 2009, Technical and economic investigation of aggregates production procedure, 16th Concrete Congress, Technical Chamber of Greece & Scientific Technical Chamber of Cyprus, 21-23 October 2009, Paphos-Cyprus, CD Proceedings (in Greek).
  9. Tsakalakis K.G., 2009, The approximate cement production cost and the viability and competitiveness of the Greek cement industry, 3rd AMIREG International Conference: Assessing the footprint of resource utilization and hazardous waste management, 7-9 September 2009, Athens-Greece, pp. 411-415.
  10. Tsakalakis K.G., 2008, Optimization of the Concrete Aggregates Production Processes, accepted for oral presentation in the 1st Congress of Concrete Structural Materials, organized by the Technical Chamber of Greece (TEE), Athens-Greece (in Greek).
  11. Tsakalakis K.G. & Stamboltzis G.A., 2008, Correlation of the Blaine Value and the d80 Size of the Cement Particle Size Distribution, ZKG (Zement Kalk und Gips), No 3, pp.
  12. Fani Kalaitzi & Tsakalakis K.G., 2007, Mineral Processing Circuits-Detection of the Appropriate Sampling Scheme, XII Balkan Mineral Processing Congress, June 2007, Delphi-Greece, pp. 433-438.
  13. Tsakalakis K.G., 2007, Prediction of the Power Consumption in Conventional Clinker Grinding Processes (Ball mills), Vol. I, 6th Panhellenic Congress of the Panhellenic Society of Chemical Engineers, Athens, Greece (in Greek), pp. 701-704.
  14. Zaroulias A., Papapanos G., Vardavoulias M & Tsakalakis K.G., 2007, Recycling of Waste Machine-Shop Cutting Tools for the Production of Thermal Spray Coatings, Vol. I, 6th Panhellenic Congress of the Panhellenic Society of Chemical Engineers, Athens, Greece (in Greek), pp. 133-136.
  15. Tsakalakis K.G., 2007, Scrap Tyres Management in the EU Cement Industry - an economic/environmental Approach, ZKG (Zement Kalk und Gips), No 4, pp. 43-55.
  16. Tsakalakis K.G., 2006, Impact Strength of Brittle Materials (Rocks), Invited Presentation at the Meeting of Refractory Experts “MORE”, T.U. Freiberg (Saxony) - Germany.
  17. Tsakalakis K.G., 2006, Raw Materials Proportioning in Cement Production, Mineral Wealth No 140/2006, pp. 7-26 (in Greek with English Abstract).
  18. Tsakalakis K.G., 2006, Raw Materials Proportioning Methods in Clinker Production, 3rd Volume, 15th Panhellenic Congress of Concrete, October 25-27, Alexandroupoli, Greece (in Greek), pp. 648-665.
  19. Tsakalakis K.G., 2006, Modelling the Crushing-Sizing Procedure of Industrial Gyratory Crushers, 11th European Symposium on Comminution, October 9-12, Budapest, Hungary.
  20. Tsakalakis K.G., 2006, Conventional Clinker Grinding-A new Approach to the Prediction of Power Consumption, Presented at Ultrafine Grinding 06 (UFG 06), June 12-13, Minetals Engineering Internatiional (MEI), Falmouth-Cornwall, U.K.
  21. Tsakalakis K.G. & Hideriotis A., 2005, Testing the Impact Strength of Concrete Aggregates-Comparison of the "Protodyakonov" and "Aggregate Impact Value (AIV)" Methods, 5th Panhellenic Congress of Ceramics, Greek Ceramic Society, 8-9 December 2005, National Technical University of Athens-Greece (in Greek with English abstract).
  22. Tsakalakis K.G. and Stamboltzis G.A., 2001, New Equations for the prediction of the Specific Energy in Ball Mills using the Denver slide-rule, published in the special issue dedicated to the Emeritus Prof. A.Z. Frangiskos, (in Greek), pp. 129-142.
  23. Kalaitzi F. & Tsakalakis K.G., 2005, Elabotation of the Method for the Prediction of the most suitable Sampling Scheme in Chemical Engineering Processes, 5th Panhellenic Congress of the Panhellenic Society of Chemical Engineers, pp. 201-204,Thessaloniki, Greece (in Greek).
  24. Tsakalakis K.G., 2005, Relationship between Electrical Energy Consumption and Cement Fineness in Clinker Grinding, 5th Panhellenic Congress of the Panhellenic Society of Chemical Engineers, pp. 445-448, Thessaloniki, Greece (in Greek).
  25.  Fani Kalaitzi & Tsakalakis K.G., 2005, Minimum Number of Sampled Streams Ensuring Circuit Mass Balance, 16th World Congress of the International Federation of Automatic Control (IFAC), July 3-8, 2005, Prague, Czech Republic (works in CD).
  26. Tsakalakis K.G. & Ioakim J.E., 2005, Power Generation Methods using Conventional Fossil Fuels, Mining and Metallurgical Annals, Vol. 15, Issue1, January-June 2005, pp. 15-44, (in Greek with English abstract).
  27. Frangiskos A.Z. & Tsakalakis K.G., 2005, A Mobile Unit for Seashore Sand Cleaning, Mineral Wealth No 134/2005, pp. 55-61 (in Greek with English abstract).
  28. Galbenis Ch.-T., Tsakalakis K.G. & Tsimas S., 2005, Replacement of Cement Raw Meal with Recycled Materials obtained from Demolished Buildings, Heleco ’05 (Technical Chamber of Greece, TEE), Athens-Greece, p. 7).
  29. Tsakalakis K.G. & Stamboltzis G.A., 2004, Modelling the Specific Grinding Energy and Ball Mill Scale-up, 11th International Federation of Automatic Control (IFAC) Symposium on Automation in Mining, Mineral and Metal Processing, September 8-10, 2004, Nancy France (Wed-A2, Grinding 1).
  30. Tsakalakis K.G., 2004, Use of a new Model to represent Hydrocyclone Corrected-Efficiency curves, 1st International Conference on Advances in Mineral Resources Management and Environmental Geotechnology (AMIREG 2004), 7-9 June 2004, Hania-Crete, Greece, pp. 169-174.
  31. Tsakalakis K.G., 2003, The Greek Cement Industry Sector and its Potential towards Sustainable Development, Sustainable Development Indicators in the Minerals Industry (SDIMI 2003), International Conference, 21-23 May 2003, Milos Island, Greece, pp. 279-284.
  32. Tsakalakis K.G., 2003, The Greenhouse Effect and the Impact of Fossil Fuel Burning and the other Anthropogenic Activities on its Evolution, Mining and Metallurgical Annals, Vol. 13, Issue1/2, January-December 2003, pp. 23-49, (in Greek with English abstract).
  33. Tsakalakis K.G., Orphanoudaki A. & Perraki Th., 2002, Mineral processing concentrates of pegmatites from Paranesti area (Northern Greece)-Possible Industrial uses, 3rd Panhellenic Congress of Ceramics, Greek Ceramic Society, 12-13 December 2002, National Technical University of Athens-Greece, pp. 15-24.
  34. Karka H. A.& Tsakalakis K.G., 2002, Rehabilitation of the "open-pit" Lignite Fields-Environmental Legislation and Regional Planning Outlook, presented at the International Scientific Symposium "Reconstruction of declining and destroyed areas of Europe", University Studio Press, September 3-5, 2001, Theessaloniki-Greece, (in Greek with English abstract).
  35. Tsakalakis K.G., 2002, The Energy Sector in the European Union and the Present and Future Situation in Greece, Mineral Wealth No 123/2002, pp.49-68, (in Greek with English abstract).
  36. Tsakalakis K.G., Frangiskos A. and Karka H., 2001, Recycled Aggregates-An Environmentally friendly Management for the Athens Urban Area, presented at the IX Balkan Mineral Processing Congress, Istanbul, Turkey, pp. 575-581.
  37. Tsakalakis K.G., Orphanoudaki A., Perraki Th. and Psaila A., 2001, Mineralogical Characterization and Beneficiation by Magnetic methods of Grecian Chromites, presented at MEGS 01 organized by the Minerals Engineering International (MEI), June 2001, Falmouth-Cornwall, U.K.
  38. Tsakalakis K.G., 2001, Some basic Factors affecting Screen Performance in Horizontal Vibrating Screens, The European Journal of Mineral Processing and Environmental Protection, 1st Issue, Year 1, EJMP&EP, S.D. Univ., Isparta, Turkey.
  39. Frangiskos A.Z., and Tsakalakis K.G., 2001, Beneficiation Study of a chromite Ore, Mineral Wealth, Issue 119, March-June, pp.7-24, (in Greek with English abstract).
  40. Tsakalakis K.G. and Stamboltzis G.A., 2001, Prediction of the Settling Velocity of irregularly shaped Particles, Minerals Engineering, Vol. 14, No. 3, pp. 349-357, Pergamon http://www.sciencedirect.com/science/article/pii/S0892687501000061.
  41. Tsakalakis K.G. and Kanakis A., 2000, Investigation of the Particle-size Distributions applied to the repeated Single Fracture of Brittle Materials", published in the special issue dedicated to the Emeritus Prof. A.Z. Frangiskos, (in Greek), pp. 105-112.
  42. Tsakalakis K.G., 2000, The significant Role of the Cement and Concrete Industry in the greek Economy and the environmental – energy Considerations of its Production and Use, Mining and Metallurgical Annals, Vol. 10, Issue 2, July-December , pp. 79-92, (in Greek with English abstract).
  43. Tsakalakis K.G., and Kalaitzi F., 2000, Software Development for the Calculation and Control of Mineral Processing Circuits, 3rd International Congress of Mineral Wealth, Greece, November 2000, Vol. II, pp. 209-218 (in Greek with English abstract).
  44. Tsakalakis K.G., Orphanoudaki A. and Perraki Th., 2000, The Effect of mineralogical Composition on the Bauxite Comminution, 3rd International Congress of Mineral Wealth, Greece, November 2000, Vol. II, pp. 271-280 (in Greek with English abstract).
  45. Tsakalakis K.G., 2000, Some basic Factors affecting Screen Performance in Horizontal Vibrating Screens, presented at the Minerals Engineering 2000 (MEI 2000) as an oral-poster presentation, November 2000,Cape Town, South Africa.
  46. Tsakalakis K.G., 2000, Use of a simplified Method to Calculate and Control the closed Crushing Circuits, Minerals Engineering, Vol. 13 (12), pp. 1289-1299, Pergamon http://www.sciencedirect.com/science/article/pii/S0892687500001114 .
  47. Tsakalakis K.G., 1999, Study of the Parameters used in the Design of Reverse Closed Circuits, published in the special issue dedicated to the late Prof. J. Papageorgakis, (in Greek), pp. 263-272.
  48. Tsakalakis K.G., 1996, Nomographs for the Evaluation and Calculation of Closed Crushing Circuits, Mining and Metallurgical Annals, Vol. 6, Issue 1, pp.25-36, (in Greek).
  49. Kalaitzi F. and Tsakalakis K.G., 1995, Principles of Automatic Control in Flotation Circuits, Mining and Metallurgical Annals, Vol.5, Issues 1-6, pp.37-45, (in Greek).
  50. Tsakalakis K.G. and Stamboltzis G.A., 1994, A Contribution to the Study of Free- settling of Particles with Irregular Shape in Fluids, Mining and Metallurgical Annals, Vol.4, Issues 1-2, pp.39-54, (in Greek).
  51. Tsakalakis K.G., 1994, A new exponential Model representing Classifier- Corrected Efficiency Curves, Mineral Wealth, Vol. 90, pp.45-51 (in English).
  52. Tsakalakis K.G., 1993, A Contribution to the Calculation and Control of Closed Crushing Circuits, Mining and Metallurgical Annals, Vol. 3, Issue 4, pp.37-45, (in Greek).
  53. Stamboltzis G.A. and Tsakalakis K.G., 1993, Tumbling Mills Power Requirements, Mining and Metallurgical Annals, Vol.3, Issue 1, pp.17-26, (in Greek with English abstract).
  54. Tsakalakis K.G., 1990, Product Size Distributions of Industrial Gyratory Crushers, Mining and Metallurgical Annals, Vol. 75, pp.41-48, (in Greek with English abstract).
  55. Tsakalakis K.G., 1990, Principles of Automatic Control in Mineral Processing-Application on Closed Wet Crushing Circuits, Mineral Wealth, Vol. 77, pp. 31-46, (in Greek with English abstract).
  56. Tsakalakis K.G. and Frangiskos A.Z., 1989, Principles of Economic Evaluation for Mining Investment Projects and Application in Mineral Processing Plant Design, Mining and Metallurgical Annals, Vol. 72-73, pp. 45-63, (in Greek with English abstract).
  57. Tsakalakis K.G. and Frangiskos A.Z., 1989, Principles of Economic Evaluation for Mining Investment Projects, General Aspects, Mining and Metallurgical Annals, Vol. 71, pp.17-36, (in Greek with English abstract).
  58. Tsakalakis K.G., 1988, Some basic Factors affecting the Operation of Horizontal Vibrating Screens, Ph.D Thesis, National Technical University of Athens, 213 pp., (in Greek).

 

< Back to my homepage