Important Journal Publications

    • A. VAMVAKARI, A. KANDIANIS, A.G. KLADAS, S.N. MANIAS: "High fidelity equivalent circuit representation of induction motor determined by finite elements for electrical vehicle drive applications”, IEEE Trans. on Magnetics, Vol. 35, no 3, pp. 1857-1860, 1999.
    • S.A. PAPATHANASSIOU, S.J. KIARTZIS, M.P. PAPADOPOULOS, A.G. KLADAS:    "Wind Turbine Flicker Calculation using Neural Networks ", International Journal on Wind Engineering,Vol. 24, No 5, pp. 317-335, 2000.
    • G.J. TSEKOURAS, S.J. KIARTZIS, A.G. KLADAS, J.A. TEGOPOULOS: "Neural Network Approach compared to Sensitivity Analysis based on Finite Element Technique for Optimization of Permanent Magnet Generators", IEEE Trans. on Magnetics, Vol. 37, no 5/1, pp. 3618-3621, Sept. 2001.
    • VAMVAKARI, A. KANDIANIS, A.G. KLADAS, S.N. MANIAS, J.A. TEGOPOULOS: "Analysis of supply voltage distortion effects on induction motor operation”, IEEE Trans. on Energy Conversion, Vol. 16, no 3, pp.209-213, Sept. 2001.
    • A. CHANIOTIS, S. PAPAPATHANASSIOU, A. KLADAS, M. PAPADOPOULOS, «Control Issues of a Permanent-Magnet Generator,Variable-Speed,Wind Turbine», Wind Engineering, Vol. 26, no 6, pp. 371-381, 2002.
    • Z. PAPAZACHAROPOULOS, K. TATIS, A.G. KLADAS, S.N. MANIAS: "Dynamic Model for Harmonic Induction Motor Analysis Determined by Finite Elements”, IEEE Trans. on Energy Conversion, Vol. 19, no 1, pp. 102-108, March 2004.
    • M.A. TSILI, A.G. KLADAS, P.S. GEORGILAKIS, A.T. SOUFLARIS, C. P. PITSILIS, J.A. BAKOPOULOS, D.G. PAPARIGAS: "Hybrid Numerical Techniques for Power Transformer Modeling: A Comparative Analysis Validated by Measurements", IEEE Trans. on Magnetics, Vol. 40, no 2, pp. 842-846, March 2004.
    • K. TATIS, A.G. KLADAS, J.A. TEGOPOULOS: "Harmonic Iron Loss Determination in Laminated Iron Cores by Using a Particular 3-D Finite-Element Model", IEEE Trans. on Magnetics, Vol. 40, no 2, pp. 860-864, March 2004.
    • M. A. TSILI, A. G. KLADAS, P. S. GEORGILAKIS, A. T. SOUFLARIS and D. G. PAPARIGAS: “Geometry Optimization of Magnetic Shunts in Power Transformers Based on a Particular Hybrid Finite Element - Boundary Element Model and Sensitivity Analysis”, IEEE Trans. on Magnetics, Vol. 41, No 5, pp. 1776-1779, May 2005.
    • G.D. KALOKIRIS, T.D. KEFALAS, A.G. KLADAS and J.A. TEGOPOULOS:  “Special air-gap element for 2D FEM analysis of electrical machines accounting for rotor skew”, IEEE Trans. on Magnetics, Vol. 41, No 5, pp. 2020-2023, May 2005.
    • E. I. AMOIRALIS, P. S. GEORGILAKIS, T.D. KEFALAS, M. A. TSILI, A. G. KLADAS:  “Artificial Intelligence combined with Hybrid FEM-BE Techniques for Global Transformer Optimization,” IEEE Trans. on Magnetics, Vol. 43, No 4, pp. 1633-1636, April 2007.
    • T.D. KEFALAS, A.G. KLADAS, A.T. SOUFLARIS, D.G. PAPARIGAS: “Multiple Grade Lamination Wound Core: A Novel Technique for Transformer Iron Loss Minimization Using Simulated Annealing With Restarts and an Anisotropy Model,” IEEE Trans. on Magnetics Vol. 44, no 6, pp. 1530-1533, June 2008.
    • E. I. AMOIRALIS, M. A. TSILI, P. S. GEORGILAKIS, A. G. KLADAS, A.T. SOUFLARIS: “A Parallel Mixed Integer Programming-Finite Element Method Technique for Global Design Optimization of Power Transformers,” IEEE Trans. on Magnetics, Vol. 44, no 6, pp. 1022-1025, June 2008.
    • D.S. RAPTIS, A.G. KLADAS and J.A. TEGOPOULOS:  “Accurate Induction Motor Estimator based on Magnetic Field Analysis”, IEEE Trans. on Magnetics, Vol. 44, no 6, pp. 1574-1577, June 2008.
    • N.M. KIMOULAKIS, A.G. KLADAS and J.A. TEGOPOULOS:  “Power Generation Optimization from Sea Waves by using a Permanent Magnet Linear Generator Drive”, IEEE Trans. on Magnetics, Vol. 44, no 6, pp. 1530-1533, June 2008.
    • E. I. AMOIRALIS, P. S. GEORGILAKIS, M. A. TSILI, A. G. KLADAS, “Global Transformer Optimization Method Using Evolutionary Design and Numerical Field Computation”, IEEE Trans. on Magnetics, Vol. 45, no 3, pp. 1720 - 1723, March 2009.
    • M. A. TSILI, E. I. AMOIRALIS, A. G. KLADAS, A.T. SOUFLARIS, “Hybrid Numerical-Analytical Technique for Power Transformer Thermal Modeling”, IEEE Trans. on Magnetics, Vol. 45, no 3, pp. 1408 - 1411, March 2009.
    • I.S. MANOLAS, A.G. KLADAS, S. N. MANIAS, “Finite-Element-Based Estimator for High-Performance Switched Reluctance Machine Drives”, IEEE Trans. on Magnetics, Vol. 45, no 3, pp. 1266 - 1269, March 2009.
    • V.S. LAZARIS, A.G. KLADAS, A.G. MAMALIS, J.A. TEGOPOULOS: “Analysis of End Zone Magnetic Field in Generators and Shield Optimization for Force Reduction on End Windings”, IEEE Trans. on Magnetics, Vol. 45, no 3, pp. 1470 - 1473, March 2009.
    • N.M. KIMOULAKIS, A.G. KLADAS and J.A. TEGOPOULOS: “Cogging Force Minimization in a Coupled Permanent Magnet Linear Generator for Sea Wave Energy Extraction Applications”, IEEE Trans. on Magnetics, Vol. 45, no 3, pp. 1246 - 1249, March 2009.
    • P.G. ROVOLIS, A.G. KLADAS and J.A. TEGOPOULOS: “Numerical and Experimental Analysis of Iron Core Losses Under Various Frequencies”, IEEE Trans. on Magnetics, Vol. 45, no 3, pp. 1206 - 1209, March 2009.
    • E. I. AMOIRALIS, M. A. TSILI, A. G. KLADAS: "Transformer Design and Optimization: A Literature Survey", IEEE Trans. on Power Delivery, Vol. 24, no 4, pp. 1999-2024, Oct. 2009.
    • T. KEFALAS, A. KLADAS, “Harmonic Impact on Distribution Transformer No-Load Loss”, IEEE Trans. on Industrial Electronics, Vol. 57, no 1, pp. 193-200, Jan. 2010.
    • K. LASKARIS, A. KLADAS, “Internal Permanent Magnet Motor Design for Electric Vehicle Drive”, IEEE Trans. on Industrial Electronics, Vol. 57, no 1, pp. 138-145, Jan. 2010.
    • G. LOIZOS, T.D. KEFALAS, A.G. KLADAS, A.T. SOUFLARIS: “Flux Distribution Analysis in Three-Phase Si-Fe Wound Transformer Cores,” IEEE Trans. on Magnetics,  Vol. 46, no 2, pp. 594-597, Feb. 2010.
    • C. PATSIOS, A. HANIOTIS,, E. TSAMPOURIS, A.G. KLADAS: “Particular Electromagnetic Field Computation for Permanent Magnet Generator Wind Turbine Analysis,” IEEE Trans. on Magnetics,  Vol. 46, no 8, pp. 2751-2754, Aug. 2010.
    • N.M. KIMOULAKIS, P.E. KAKOSIMOS, A.G. KLADAS: “Hybrid Technique for Dynamic Modeling of the Performance of Linear Generators With Skewed Mounted Permanent Magnets”, IEEE Trans. on Magnetics, Vol. 47, no 5, pp. 906-909, May 2011.
    • T.D. KEFALAS, G. LOIZOS, A.G. KLADAS: “Transformer Joints FE Analysis Using Pseudo-Source Technique,” IEEE Trans. on Magnetics,  Vol. 47, no 5, pp. 1058-1061, May 2011.
    • T.D. KEFALAS, G. LOIZOS, A.G. KLADAS: “Transformer Joints FE Analysis Using Pseudo-Source Technique”, IEEE Trans. on Magnetics, Vol. 47, no 5, pp. 1058-1061, May 2011.
    • C. PATSIOS, E. TSAMPOURIS, M. BENIAKAR,  P. ROVOLIS, A.G. KLADAS: “Dynamic Finite Element Hysteresis Model for Iron Loss Calculation in Non-Oriented Grain Iron Laminations Under PWM Excitation”, IEEE Trans. on Magnetics, Vol. 47, no 5, pp. 1130-1133, May 2011.
    • K. LASKARIS, A. KLADAS, “Permanent-Magnet Shape Optimization Effects on Synchronous Motor Performance”, IEEE Trans. on Industrial Electronics, Vol. 58, no 9, pp. 3776-3783, Sep. 2011.
    • T.D. KEFALAS, A.G. KLADAS, “Development of Distribution Transformers Assembled of Composite Wound Cores”, IEEE Trans. on Magnetics, Vol. 48, no 2, pp. 775-778, 2012.
    • E. I. AMOIRALIS, M. A. TSILI, A. G. KLADAS: “Power Transformer Economic Evaluation in Decentralized Electricity Markets”, IEEE Trans. on Industrial Electronics, Vol. 59, no 5, pp. 2329-2341, 2012.
    • E. TSAMPOURIS, M.E. BENIAKAR, A.G. KLADAS, “Geometry Optimization of PMSMs Comparing Full and Fractional Pitch Winding Configurations for Aerospace Actuation Applications”, IEEE Trans. on Magnetics, Vol. 48, no 2, pp. 943-946, 2012.
    • T.D. KEFALAS, A.G. KLADAS, “Analysis of Transformers Working Under Heavily Saturated Conditions in Grid-Connected Renewable Energy Systems”, IEEE Trans. on Industrial Electronics, Vol. 59, no 5, pp. 2342-2350, 2012.
    • E. I. AMOIRALIS, M. A. TSILI, A. G. KLADAS, A.T. SOUFLARIS: “Distribution transformer cooling system improvement by innovative tank panel geometries”, IEEE Trans. on Dielectrics and Electrical Insulation, Vol. 19, no 3, pp. 1021-1028, 2012.
    • T.D. KEFALAS, A.G. KLADAS, “Mixed Si-Fe Wound Cores Five Legged Transformer: Losses and Flux Distribution Analysis”, IEEE Trans. on Magnetics, Vol. 48, no 4, pp. 1609-1612, 2012.
    • G. LOIZOS, A.G. KLADAS, “Core Vibration Analysis in Si-Fe Distributed Gap Wound Cores”, IEEE Trans. on Magnetics, Vol. 48, no 4, pp. 1617-1620, 2012.
    • K. LASKARIS, A.G. KLADAS, “Optimal Power Utilization by Adjusting Torque Boost and Field Weakening Operation in Permanent Magnet Traction Motors”, IEEE Trans. on Energy Conversion,Vol. 27, no 3, pp. 615-623, 2012.
    • KAKOSIMOS, A.G. KLADAS, S.N. MANIAS, “Fast Photovoltaic System Voltage or Current Oriented MPPT Employing a Predictive Digital Current-Controlled Converter”, IEEE Trans. on Industrial Electronics, Vol. 60, no 12, pp. 5673-5685, 2013.
    • P. KAKOSIMOS, E. TSAMPOURIS, A.G. KLADAS,: “Design Considerations in Actuators for Aerospace Applications”, IEEE Trans. on Magnetics, Vol. 49, no 5, pp. 2249-2252, 2013.
    • E. TSAMPOURIS, P. KAKOSIMOS, A.G. KLADAS,: “Coupled Computation of Electric Motor Design and Control Parameters Based on Ant Colonies Speed Trajectory Optimization”, IEEE Trans. on Magnetics, Vol. 49, no 5, pp. 2177-2180, 2013.
    • P. KAKOSIMOS, A.G. SARIGIANNIDIS, M.E. BENIAKAR, A.G. KLADAS, C. GERADA, “Induction Motors Versus Permanent-Magnet Actuators for Aerospace Applications”, IEEE Trans. on Industrial Electronics, Vol. 61, no 8, pp. 4315-4325, 2014.
    • M.E. BENIAKAR, A.G. SARIGIANNIDIS, P. KAKOSIMOS, A.G. KLADAS: “Multiobjective Evolutionary Optimization of a Surface Mounted PM Actuator With Fractional Slot Winding for Aerospace Applications”, IEEE Trans. on Magnetics, Vol. 50, no 2, 2014.
    • T.D. KEFALAS, A.G. KLADAS, “Thermal Investigation of Permanent-Magnet Synchronous Motor for Aerospace Applications”, IEEE Trans. on Industrial Electronics, Vol. 61, no 8, pp. 4404 - 4411, 2014.
    • E. I. AMOIRALIS, M. A. TSILI, D. G. PAPARIGAS, A. G. KLADAS: “Global Transformer Design Optimization Using Deterministic and Nondeterministic Algorithms”, IEEE Trans. on Industy Applications, Vol. 50, no 1, pp. 383 – 394, 2014.
    • M.E. BENIAKAR, P. KAKOSIMOS, A.G. KLADAS: “Strength Pareto Evolutionary Optimization of an In-Wheel PM Motor With Unequal Teeth for Electric Traction”, IEEE Trans. on Magnetics, Vol. 51, no 3, 2015.
    • A.G. SARIGIANNIDIS, A.G. KLADAS: “Switching Frequency Impact on Permanent Magnet Motors Drive System for Electric Actuation Applications”, IEEE Trans. on Magnetics, Vol. 51, no 3, 2015.
    • A. SARIGIANNIDIS, M. BENIAKAR,  P. KAKOSIMOS, A. KLADAS, L. PAPINI, C. GERADA, "Fault Tolerant Design of Fractional Slot Winding Permanent Magnet Aerospace Actuator”, IEEE Transactions on Transportation Electrification, Vol. 2, no. 3, pp.  380–390, 2016.
    • A. ALEXANDROU, N. ADAMOPOULOS, A. KLADAS, "Development of a Constant Switching Frequency Deadbeat Predictive Control Technique for Field-Oriented Synchronous Permanent-Magnet Motor Drive”, IEEE Transactions on Industrial Electronics, Vol. 63, no. 8, pp. 5167-5175, 2016,
    • A. SARIGIANNIDIS, E. CHATZINIKOLAOU, C. PATSIOS, A. KLADAS, "Shaft Generator System Design and Ship Operation Improvement Involving SFOC Minimization, Electric Grid Conditioning, and Auxiliary Propulsion”, IEEE Transactions on Transportation Electrification, Vol. 2, no. 4, pp. 558-569, 2016.
    • C. KRASOPOULOS, M. BENIAKAR, A. KLADAS, "Robust Optimization of High-Speed PM Motor Design", IEEE Transactions on Magnetics, vol. 53, no. 6, pp.  7207304, 2017.
    • C.  KRASOPOULOS, M. BENIAKAR, A. KLADAS, "Velocity and Torque Limit Profile Optimization of Electric Vehicle Including Limited Overload”, IEEE Transactions on Industry Applications, Vol. 53, no. 4, pp.  3907-3916, 2017.
    • C. KRASOPOULOS, I. ARMOUTI, A. KLADAS, "Hybrid Multiobjective Optimization Algorithm for PM Motor Design”, IEEE Transactions on Magnetics, Vol. 53, no. 6, pp.  8104304, 2017.
    • A. SARIGIANNIDIS, M. BENIAKAR, A. KLADAS, "Fast Adaptive Evolutionary PM Traction Motor Optimization Based on Electric Vehicle Drive Cycle”, IEEE Transactions on Vehicular Technology, Vol. 66, no. 7, pp. 5762-5774, 2017.
    • C. KRASOPOULOS, M. BENIAKAR, A. KLADAS, “Multicriteria PM Motor Design Based on ANFIS Evaluation of EV Driving Cycle Efficiency”, IEEE Transactions on Transportation Electrification, Vol. 4,    No. 2, pp. 525-535, 2018.
    • A. DIAMANTIS, A. KLADAS , “Mixed Numerical Methodology for Evaluation of Low-Frequency Electric and Magnetic Fields Near Power Facilities”, IEEE Transactions on Magnetics, Vol. 55, No. 6,  pp.  7000704, 2019.
    • A. KORONIDES, C. KRASOPOULOS, D. TSIAKOS, M. S. PECHLIVANIDOU, A. KLADAS, “Particular Coupled Electromagnetic, Thermal, Mechanical Design of High-Speed Permanent-Magnet Motor”, IEEE Transactions on Magnetics, Vol. 56, No. 3, pp. 7510605, 2020.